Hyundai Kona (2018 year). Manual — part 10
Convenient features of your vehicle
Head Up Display Information
i
Information
If you select the Turn By Turn (TBT)
navigation information as HUD con-
tents, the Turn By Turn (TBT) naviga-
tion information will not be displayed
on the LCD Display.
Head Up Display Setting
On the LCD display, you can change
the head up display settings as fol-
lows.
• Display Height
OOS047082L
• Rotation
1. Turn By Turn
(TBT) navigation
information
• Brightness
2. Road signs
• Content Select
3. Speedometer
• Speedometer Size
4. Cruise setting speed
• Speedometer Color
5. Lane Keeping Assist (LKA) system
For more details, refer to "LCD
information (if equipped)
Display" in this chapter.
6. Blind-spot Collision Warning
(BCW) system information
(if equipped)
7. Warning lights
8. Audio/Video information
3-82
LIGHTING
Exterior lights
NOTICE
Lighting control
•
Do not cover or spill anything on
the sensor (1) located on the
instrument panel.
•
Do not clean the sensor using a
window cleaner, the cleanser
may leave a light film which
3
could interfere with sensor oper-
ation.
•
If your vehicle has window tint
OOS047050L
or other types of metallic coat-
ing on the front windshield, the
AUTO light position (if equipped)
AUTO light system may not work
OPDE046065
When the light switch is in the AUTO
properly.
position, the position lamp and head-
To operate the lights, turn the knob at
lamp will be turned ON or OFF auto-
the end of the control lever to one of
matically depending on the amount
the following positions:
of light outside the vehicle.
(1) O position
(2) AUTO light position (if equipped)
Even with the AUTO light feature in
(3) Position lamp position
operation, it is recommended to
(4) Headlamp position
manually turn ON the lamps when
driving at night or in a fog, or when
you enter dark areas, such as tun-
nels and parking facilities.
3-83
Convenient features of your vehicle
High beam operation
OAE046469L
OAE046467L
Position lamp position (
)
Headlamp position (
)
OAE046453L
The position lamp, license plate lamp
The headlamp, position lamp, license
To turn on the high beam headlamp,
and instrument panel lamp are turned
plate lamp and instrument panel lamp
push the lever away from you. The
ON.
are turned ON.
lever will return to its original position.
The high beam indicator will light
i
Information
when the headlamp high beams are
The ignition switch must be in the ON
switched on.
position to turn on the headlamp.
To turn off the high beam headlamp,
pull the lever towards you. The low
beams will turn on.
WARNING
Do not use high beam when there
are other vehicles approaching
you. Using high beam could
obstruct the other driver's vision.
3-84
High Beam Assist (HBA) system
4.The High Beam Assist (HBA) will
(if equipped)
turn on when vehicle speed is
above 45km/h (25mph).
1) If the light switch is pushed away
when the High Beam Assist
(HBA) is operating, the High
Beam Assist (HBA) will turn off
and the high beam will be on
3
continuously.
2) If the light switch is pulled
towards you when the high
beam is off, the high beam will
OAE046455L
turn on without the High Beam
To flash the high beam headlamp,
Assist
(HBA) canceled. When
pull the lever towards you, then
you let go of the light switch, the
OPDE046057
release the lever. The high beams
lever will move to the middle and
will remain ON as long as you hold
High Beam Assist (HBA) is a system
the high beam will turn off.
that automatically adjusts the head-
the lever towards you.
3) If the light switch is pulled
lamp range (switches between high
towards you when the high
beam and low beam) according to
beam is on by the High Beam
the brightness of other vehicles and
Assist (HBA), the low beam will
road conditions.
be on and the High Beam Assist
(HBA) will turn off.
Operating condition
4) If the light switch is placed to the
headlamp position, the High
1.Place the light switch in the AUTO
Beam Assist (HBA) will turn off
position.
and the low beam will be on
2.Turn on the high beam by pushing
continuously.
the lever away from you.
3. The High Beam Assist (HBA) (
)
indicator will illuminate.
3-85
Convenient features of your vehicle
When the High Beam Assist (HBA) is
Warning light and message
CAUTION
operating, the high beam switches to
low beam in the below conditions.
The system may not operate
-
When the headlamp of an on-com-
normally in the below condi-
ing vehicle is detected.
tions.
-
When the tail lamp of a vehicle in
When the light from on-com-
front is detected.
ing or front vehicle is dim
-
When headlamp/tail lamp of bicy-
•
When the in light from the on-
cle/motorcycle is detected.
coming or front vehicle is not
-
When the surrounding is bright
detected because of lamp
enough high beams are not needed.
damage, hidden from sight,
-
When streetlights or other lights
etc.
OOS047127L
are detected.
•
When the lamp of the on-com-
When the High Beam Assist (HBA) is
-
When the light switch is not in the
ing or front vehicle is covered
AUTO position.
not working properly, the warning
with dust, snow or water.
message will come on for a few sec-
-
When the High Beam Assist (HBA)
•
When the front vehicle’s head-
ond. After the message disappears,
is off.
lamps are off but the fog
the master warning light (
) will illu-
lamps on and etc.
-
When vehicle speed is below 35 km/h
minate.
(22mph).
We recommend that you take your
vehicle to an authorized HYUNDAI
dealer and have the system checked.
3-86
When it is affected by an
• When a vehicle suddenly
WARNING
external condition
appears from an around a cor-
•
When there is a similar
ner.
•
Do not disassemble a front
shaped lamp with the front
• When the vehicle is tilted from
view camera temporarily for
vehicle’s lamps.
a flat tire or being towed.
tinted window or attaching any
types of coatings and acces-
•
When the headlamp is not
• When the Lane Keeping Assist
sories. If you disassemble the
repaired or replaced at an
(LKA) system warning light illu-
3
camera and assemble it again,
authorized dealer.
minates. (if equipped)
we recommend that you take
•
When headlamp aiming is not
When the front visibility is poor
your vehicle to an authorized
properly adjusted.
•
When the lamp of the on-coming
HYUNDAI dealer and have the
•
When driving on a narrow
or front vehicle is covered with
system checked to need a cali-
winding road or rough road.
dust, snow or water.
bration.
•
When driving downhill or
•
When the light from the on-com-
•
When you replace or reinstall
uphill.
ing or front vehicle is not detect-
the windshield glass, front
•
When only part of the vehicle
ed because of exhaust fume,
view camera, we recommend
in front is visible on a cross-
smoke, fog, snow, etc.
that you take your vehicle to an
road or on a corner.
•
When the front window is cov-
authorized HYUNDAI dealer
ered with foreign matters.
and have the system checked.
•
When there is a traffic light,
reflecting sign, flashing sign
•
When it is hard to see because of
•
Be careful that water doesn’t
or mirror.
fog, heavy rain or snow and etc.
get into the High Beam Assist
(HBA) unit and do not remove
•
When the road conditions are
or damage related parts of the
bad such as being wet or cov-
High Beam Assist (HBA) sys-
ered with snow.
tem.
•
When the front vehicle’s head-
lamps are off but the fog
lamps on.
3-87
Convenient features of your vehicle
Turn signals and lane change
One-touch turn signal function
•
Do not place objects on the
signals
To activate a one-touch turn signal
crash pad that reflect light
function, move the turn signal lever
such as mirrors, white paper,
slightly and then release it. The lane
etc. The system may malfunc-
change signals will blink 3, 5 or 7
tion if sunlight is reflected.
times.
•
At times, the High Beam Assist
You can activate/deactivate the One
(HBA) may not work properly.
Touch Turn Signal function or choose
The system is for your conven-
the number of blinks (3, 5, or 7) from
ience only. It is the responsibil-
the User Settings mode on the LCD
ity of the driver for safe driving
display. For more details, refer to
practices and always check the
"LCD Display" in this chapter.
road conditions for your safety.
•
When the system does not
operate normally, change the
OTLE045284
Front fog lamp (if equipped)
lamp position manually
To signal a turn, push down on the
between the high beam and
lever for a left turn or up for a right
low beam.
turn in position (A). To signal a lane
change, move the turn signal lever
slightly and hold it in position (B).The
lever will return to the OFF position
when released or when the turn is
completed.
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned
out and will require replacement.
OPDE046066
Fog lamps are used to provide
improved visibility when visibility is
poor due to fog, rain or snow, etc.
3-88
Use the switch next to the headlamp
Rear fog lamp
switch to turn the fog lamps ON and
OFF.
1. Turn on the position lamp.
2. Turn the light switch (1) to the front
fog lamp position.
3. To turn off the front fog lamp, turn
3
the light switch to the front fog
lamp position again or turn off the
position lamp.
OTLE045285
NOTICE
Vehicle without front fog lamp
OPDE046064
When in operation, the fog lamps
To turn on the rear fog lamp:
Vehicle with front fog lamp
consume large amounts of vehicle
Position the light switch in the head-
electrical power. Only use the fog
To turn on the rear fog lamp:
lamp position, and then turn the light
lamps when visibility is poor.
Position the light switch in the posi-
switch (1) to the rear fog lamp position.
tion lamp position, turn the light
switch (1) to the front fog lamp posi-
tion, and then turn the light switch (1)
To turn the rear fog lamps off, do one
to the rear fog lamp position.
of the following:
To turn the rear fog lamps off, do one
• Turn off the headlamp switch.
of the following:
• Turn the light switch to the rear fog
• Turn off the position light switch.
lamp position again.
• Turn the light switch to the rear fog
lamp position again.
• When the light switch is in the posi-
tion lamp position, if you turn off
the front fog lamp, the rear fog
lamp will also turn off.
3-89
Convenient features of your vehicle
Battery saver function
Headlamp delay function
NOTICE
The purpose of this feature is to pre-
(if equipped)
If the driver gets out of the vehicle
vent the battery from being dis-
If you place the ignition switch to the
through other doors (except dri-
charged. The system automatically
ACC or OFF position with the head-
ver's door), the battery saver func-
turns off the position lamp when the
lamps ON, the headlamps (and/or
tion does not operate and the
driver turns the engine off and opens
position lamps) remain on for about 5
headlamp delay function does not
the driver-side door.
minutes. However, with the engine off if
turn off automatically. Therefore, It
With this feature, the position lamps
the driver’s door is opened and closed,
causes the battery to be dis-
will turn off automatically if the driver
the headlamps (and/or position lamps)
charged. In this case, make sure to
parks on the side of road at night.
are turned off after 15 seconds.
turn off the lamp before getting out
If necessary, to keep the lamps on
The headlamps
(and/or position
of the vehicle.
lamps) can be turned off by pressing
when the engine is turned off, perform
the following:
the lock button on the remote key or
smart key twice or turning the light
1) Open the driver-side door.
switch to the OFF or AUTO position.
2) Turn the position lamps OFF and
However, if you turn the light switch
ON again using the light switch on
to the AUTO position when it is dark
the steering column.
outside, the headlamps will not be
turned off.
You can activate or deactivate the
Headlamp Delay function from the
User Settings mode on the LCD dis-
play. For more details, refer to
"LCD Display" in this chapter.
3-90
Daytime running light (DRL)
Headlamp leveling device
Listed below are examples of appro-
(if equipped)
(if equipped)
priate switch settings for varying
loads. For loading conditions other
The Daytime Running Lights (DRL)
than those listed, adjust the switch
can make it easier for others to see
position to the most similar situation.
the front of your vehicle during the
day, especially after dawn and before
Switch
sunset.
Loading condition
position
The DRL system will turn the dedi-
3
Driver only
0
cated lamp OFF when:
Driver + Front passenger
0
1. The headlamps or front fog lights
are in the ON position.
Full passengers (including driver)
1
2. The position light switch is in the
Full passengers (including driver)
2
ON position.
+ Maximum permissible loading
OOS047049
3. The engine is turned off.
Driver + Maximum permissible
3
Manual type
loading
To adjust the headlamp beam level
according to the number of the pas-
sengers and loading weight in the
luggage area, turn the beam leveling
switch.
The higher the number on the switch
position, the lower the headlamp
beam level. Always keep the head-
light beam at the proper leveling
position, or headlamps may dazzle
other road users.
3-91
Convenient features of your vehicle
Automatic type
Low Beam Assist-Static light
Welcome system (if equipped)
It automatically adjusts the head-
(if equipped)
Interior lamp
lamp beam level according to the
While driving a corner, for greater
When the interior lamp switch is in
number of passengers and loading
visibility and safety, either the left or
the DOOR position and all doors (and
weight in the luggage area.
right side Low Beam Assist-Static
tailgate) are closed and locked, the
It also adjusts to the appropriate head-
light will turn on automatically. The
room lamp will come on for 30 sec-
lamp beam level for various situations.
Low Beam Assist-Static light will turn
onds if any of the below is performed.
on when one of the following condi-
• When the door unlock button is
tions occur.
WARNING
pressed on the remote key or
• Vehicle speed is less than 10 km/h
smart key.
If the function does not work
(6 mph) and steering wheel angle
• When the button of the outside
properly, we recommend that
is turned approximately 80 degrees
door handle is pressed with the
the system be inspected by an
with the low beam on.
smart key in possession.
authorized HYUNDAI dealer. Do
• Vehicle speed is between 10 km/h
not attempt to inspect or
At this time, if you press the door lock
(6 mph) to 90 km/h (56 mph) and
or unlock button, the room lamp will
replace the wiring yourself.
steering wheel angle is turned
turn off immediately.
approximately 35 degrees with the
low beam on.
• When the vehicle is in reverse with
one of the conditions above satis-
fied, the light opposite to the direc-
tion the steering wheel is steered
will turn on.
3-92
Interior lights
Front lamps
Front door lamp (
) (2) :
NOTICE
■ Type A (Without sunglass case)
The room lamp for the front/rear
Do not use the interior lights for
seats is automatically turned ON for
extended periods when the engine
approximately 30 seconds, when a
is turned off otherwise the battery
door is opened.
will discharge.
The room lamp for the front/rear
3
seats is automatically turned ON for
WARNING
approximately 15 seconds, when the
remote key (smart key) unlocks the
Do not use the interior lights
doors. The room lamp fades out,
when driving in the dark.The inte-
when the ignition switch is placed to
rior lights may obscure your view
OOS047051
the ON position in 15 seconds. The
and cause an accident.
■ Type B (With sunglass case)
room lamp remains ON up to 20 min-
utes, when a door is opened with the
ignition switch in the either the ACC
Interior lamp AUTO cut
or OFF position.
The interior lamps will automatically
go off approximately 20 minutes after
the engine is turned off and the
Front room lamp
doors are closed. If a door is opened,
•
(3) :
the lamp will go off 40 minutes after
the engine is turned off. If the doors
Press the button to turn ON the
room lamp for the front/rear seats.
are locked and the vehicle enters the
armed stage of the theft alarm sys-
OOS047052
tem, the lamps will go off five sec-
•
(4) :
onds later.
Front map lamp (1)
Press the button to turn OFF the
Press the map lamp lens (1) to turn
room lamp for the front/rear seats.
ON the map lamp. Re-press the map
lamp lens to turn OFF the map lamp.
3-93
Convenient features of your vehicle
Rear lamps
NOTICE
Vanity mirror lamp (if equipped)
■ Type A
Do not leave the lamp switches on
for an extended period of time
when the engine is turned off.
Luggage compartment lamp
OOS047321
OOS047055
■ Type B
Push the switch to turn the light on or
off.
•
: The lamp will turn on if this
button is pressed.
•
: The lamp will turn off if this
OOS047054
button is pressed.
The luggage compartment lamp
NOTICE
comes on when the tailgate is opened.
Always have the switch in the off
NOTICE
position when the vanity mirror
lamp is not in use. If the sunvisor
OOS047053
The luggage compartment lamp
is closed without the lamp off, it
Rear room lamp switch :
comes on as long as the tailgate is
may discharge the battery or dam-
open. To prevent unnecessary
Press this button to turn the room
age the sunvisor.
charging system drain, close the
lamp on and off.
tailgate securely after using the
tailgate.
3-94
WIPERS AND WASHERS
A : Wiper speed control (front)
■ Front windshield wiper/washer
■ Rear windshield wiper/washer
·
/ MIST - Single wipe
• Type A
• Type A
· O / OFF - Off
· --- / INT - Intermittent wipe
AUTO* - Auto control wipe
· 1 / LO- Low wiper speed
· 2 / HI - High wiper speed
3
B : Intermittent control wipe time
adjustment
C : Wash with brief wipes (front)
• Type B
• Type B
D : Rear wiper control*
· 2 / HI - High wiper speed
· 1 / LO - Low wiper speed
· O / OFF - Off
E : Wash with brief wipes (rear)
* : if equipped
OTLE045159/OTLE045161/OTLE045507/OTLE045508
3-95
Convenient features of your vehicle
Windshield wipers
AUTO (Automatic) control
WARNING
(if equipped)
Operates as follows when the igni-
tion switch is turned ON.
To avoid personal injury from the
/MIST : For a single wiping cycle,
windshield wipers, when the
move the lever down (
)
engine is running and the wind-
or up (MIST) and release
shield wiper switch is placed in
it. The wipers will operate
the AUTO mode:
continuously if the lever is
• Do not touch the upper end of
held in this position.
the windshield glass facing the
O/OFF : Wiper is not in operation
rain sensor.
---/INT : Wiper operates intermittently
• Do not wipe the upper end of
at the same wiping intervals.
Sensor
the windshield glass with a
Use this mode in light rain or
damp or wet cloth.
mist. To vary the speed set-
OOS047322L
• Do not put pressure on the
ting, turn the speed control
windshield glass.
The rain sensor located on the upper
knob.
end of the windshield glass senses
1/LO : Normal wiper speed
the amount of rainfall and controls
NOTICE
2/HI : Fast wiper speed
the wiping cycle for the proper inter-
val. The more it rains, the faster the
• When washing the vehicle, set the
wiper operates.
wiper switch in the O (OFF) position
i
Information
to stop the auto wiper operation.
When the rain stops, the wiper stops.
If there is heavy accumulation of snow
The wiper may operate and be dam-
To vary the speed setting, turn the
or ice on the windshield, defrost the
aged if the switch is set in the AUTO
speed control knob (1).
windshield for about 10 minutes, or until
mode while washing the vehicle.
If the wiper switch is set in AUTO
the snow and/or ice is removed before
• Do not remove the sensor cover
mode when the ignition switch is in
using the windshield wipers to ensure
located on the upper end of the
the ON position, the wiper will oper-
proper operation.
passenger side windshield glass.
ate once to perform a self-check of
If you do not remove the snow and/or ice
Damage to system parts could
the system. Set the wiper to OFF
before using the wiper and washer, it may
occur and may not be covered by
position when the wiper is not in use.
damage the wiper and washer system.
your vehicle warranty.
3-96
Windshield washers
The spray and wiper operation will
CAUTION
continue until you release the lever.
■ Type A
If the washer does not work, you may
•
To prevent possible damage
need to add washer fluid to the wash-
to the washer pump, do not
er fluid reservoir.
operate the washer when the
If equipped with the Headlamp
fluid reservoir is empty.
Washer, washer fluid will be sprayed
•
To prevent possible damage
on the headlamp at the same time you
3
to the wipers or windshield,
operate the windshield washer when:
do not operate the wipers
1. The ignition switch is in the ON
when the windshield is dry.
position.
•
To prevent damage to the
2. The light switch is in the headlamp
wiper arms and other compo-
OTLE045163
position.
nents, do not attempt to move
■ Type B
the wipers manually.
WARNING
•
To prevent possible damage
to the wipers and washer sys-
When the outside temperature is
tem, use anti-freezing washer
below freezing, ALWAYS warm the
fluids in the winter season or
windshield using the defroster to
cold weather.
prevent the washer fluid from
freezing on the windshield and
obscuring your vision which
could result in an accident and
serious injury or death.
OTLE045164
In the OFF (O) position, pull the lever
gently toward you to spray washer
fluid on the windshield and to run the
wipers 1-3 cycles.
3-97
Convenient features of your vehicle
Rear window wiper and wash-
Turn the switch to the desired posi-
Push the lever away from you to
er switch (if equipped)
tion to operate the rear wiper and
spray rear washer fluid and to run the
washer.
rear wipers
1~3 cycles. The spray
■ Type A
and wiper operation will continue until
2 / HI - High wiper speed
you release the lever. (if equipped)
1 / LO - Low wiper speed
O / OFF - Off
Auto rear wiper (if equipped)
■ Type A
The rear wiper will operate while the
vehicle is in reverse with the front
wiper ON by selecting the function on
the LCD display.
Go to ‘User Settings Convenience
Auto Rear Wiper (reverse)’.
OTLE045167
■ Type B
OTLE045168
■ Type B
OTLE045165
The rear window wiper and washer
switch is located at the end of the
wiper and washer switch lever.
OTLE045166
3-98
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст