Skoda Octavia (2019 year). Instruction — part 10
Select source and control playback
›
To select the playback source tap the function surface in the main menu
and select the source tablet.
›
To playback, select the category and then the title.
If two tablets are connected, the title playback starts in the two tablets at the
same time.
Playback can be controlled via Infotainment or on each tablet, and are inde-
pendent from each other. This means there is an option to playback different
titles on the tablets at the same time.
Playback control
Operation
Action
Play / Pause
Tap
Plays the current track from the start
Tap
after 3 s from the start of the track
playback
Play the previous title
Tap
within 3 seconds from the start of the
track playback
Play back the next title
Tap
Movement within the track is possible by touching your finger on the timeline
B
Note
Some tablet types allow playback of audio files or videos by an inserted SD
card in the tablet. Playback of these tracks may be limited.
Supported file formats
Type
Format
Operating system
Android
Operating system
iOS
Video
MPEG-4 Part 2
MPEG-4 Part 10
(H264)
XVID
Type
Format
Operating system
Android
Operating system
iOS
Audio
MPEG-1;2 and
2.5
Layer 3 (mp3)
AAC
(4.1)
M4A
(4.1)
OGG
FLAC
WAV
(4.1)
157
Media Command
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Telephone
Introductory information
Introduction to the subject
WARNING
The general binding country-specific regulations for operating mobile
phones in the vehicle must be observed.
Telephone
Applies to Infotainment Columbus, Amundsen, Bolero.
Fig. 192
Telephone: Main menu
The Telephone main menu is displayed if a phone or a SIM card with activated
phone service on the external module is connected to Infotainment.
›
To display, tap the sensor field
.
›
or: Tap the
sensor field and then the function surface .
Main menu
Name of the connected telephone (tap to display the list paired tele-
phones)
Preset station buttons for favourite contacts
Choice of storage group for the preferred contacts
Name of the telephone service provider (with active roaming, the symbol
appears before the name )
Main telephone icon
▶
- a telephone connected via Bluetooth
®
▶
- a SIM card with activated telephone services, inserted in the exter-
nal module
A
B
C
D
E
List of connected telephones, which are available as the source of tele-
phone contacts
▶
- no telephone is connected for telephone contacts
▶
- a telephone is connected for telephone contacts
Change the main phone to the extension telephone
Enter the telephone number
List of contacts
Menu with text messages (SMS)
Call list
Menu settings for Telephone
Symbols in the status bar
Signal strength of the telephone network, data connection type if re-
quired
A telephone connected via Bluetooth
®
(applies to Infotainment Colum-
bus)
Charge status of the telephone battery
Missed call
Current call
Incoming SMS
ID of the telephone's wireless charging function
fotainment Columbus)
PIN code of the SIM card was not entered
Telephone
Applies to Infotainment Swing.
Fig. 193
Telephone: Main menu
The Telephone main menu appears when a telephone is connected to Infotain-
ment.
F
G
158
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
›
To display, press the
button.
To display the Telephone main menu if a different menu is displayed, which was
open last, press the
button again.
Main menu
Name of the main telephone (tap to display the list of paired telephones)
Preset station buttons for favourite contacts
Choice of storage group for the preferred contacts
Name of the telephone service provider (with active roaming, the sym-
bol appears before the name )
Enter the telephone number
List of contacts
Call list (missed calls, in addition to the function surface, the number of
calls when missed is displayed)
Starting voice control of the connected phone (e.g. Apple Siri, Google
Voice)
Menu settings for Telephone
Symbols in the status bar
Signal strength of the telephone service network
Charge status of the telephone battery
Missed call
Current call
Pairing and connecting
Introduction to the subject
To connect a telephone with Infotainment, the two devices must be paired via
Bluetooth
®
.
Depending on the Infotainment model, up to 20 external devices can be paired
with the device. After reaching the maximum number, the pairing of the next
external device will replace that of the device that has not been used for the
longest period of time.
Connection to an already paired telephone is established automatically after
the ignition is switched on. Or, it is sufficient to search for the phone in the list
of paired devices.
A
B
C
D
The range of the connection to Infotainment is limited to the passenger com-
partment.
Compatibility and update
By scanning the QR code
on page 122 or typing the following ad-
dress into the web browser, information about the compatibility of phones and
available updates for the Infotainment's Bluetooth
®
can be displayed.
http://go.skoda.eu/compatibility
conditions for pairing
The ignition is switched on.
The Bluetooth
®
function of the infotainment and the telephone is switched
on.
The visibility of the infotainment and the telephone is switched on.
The telephone is within range of the Bluetooth
®
signal of Infotainment.
The telephone is compatible with the infotainment.
There is no external device connected to Infotainment using Apple
CarPlay.
Pairing and connection process
Pair the telephone with Infotainment
›
Search available Bluetooth
®
devices in your telephone.
›
Select the name of the Infotainment system.
The name of the Infotainment system can be checked in the Telephone main
menu if you tap on the function surface → Bluetooth in the Name: menu item.
›
Confirm the PIN code (enter and confirm if necessary).
The phone is either connected to the Infotainment or just linked, depending on
the number of already connected external devices and on the use of the SIM
card inserted in the external module (applies to Infotainment Columbus)
Pair Infotainment with the telephone
›
If no telephone is connected to the Infotainment system, press the but-
ton/sensor field
and then tap the Find telephone function surface or press
the
sensor field, and then tap the function surface → Find mobile phone.
›
If one telephone is connected to the infotainment system, then, in the Tele-
phone main menu, tap on the
→ Find mobile phone function surface.
159
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
›
If a SIM card with activated telephone services is inserted in the external
module of infotainment Columbus, then, in the Telephone main menu, tap on
the → Find mobile phone.
›
Select the desired telephone from the list of visited external Bluetooth
®
devi-
ces.
›
Confirm the PIN code (enter and confirm if necessary).
WARNING
Do not pair and connect a telephone to the Infotainment system while driv-
ing the vehicle - there is risk of an accident!
Connect phone using the rSAP profile
Applies to Infotainment Columbus with the SIM card slot in the external mod-
ule.
A phone that has been connected via the Bluetooth
®
rSAP profile (remote
transfer of SIM data) can be used for phone and data services.
Pair the phone with Infotainment
›
Turn on the ignition and switch on Infotainment.
›
In the Telephone main menu, switch on the → Business phone “interface”.
›
Switch on Bluetooth
®
visibility in the phone and allow the connection via the
Bluetooth
®
rSAP profile.
›
Search for a phone and connect to the device
If the Bluetooth
®
rSAP profile is supported by the telephone to be connected,
then the infotainment system tries to connect to the phone using this profile
with priority.
Functional impairment
In the following cases, the phonecannot be connected to Infotainment via the
Bluetooth
®
rSAP profile.
▶
The SIM card is plugged into the external module.
▶
An external device is connected to Infotainment using Apple CarPlay or
Android Auto.
Note
Vehicle antennas are used to receive the mobile radio signal of the connected
phone.
Possible connection types
Depending on the number of connected Bluetooth
®
devices, connection type, as well as the use of the SIM card in the external module, the following functions
are available.
160
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Only valid for Infotainment Columbus.
Connec-
tion
version
The first device (main phone)
The second device (additional phone)
Third device
Fourth device
Telephone
SIM card
(In the external mod-
ule)
Telephone
SIM card
(In the external mod-
ule)
1.
rSAP
incoming / outgoing
Calls, text messages,
telephone contacts,
Data connection:
Bluetooth
®
player
-
HFP (incoming calls),
Bluetooth
®
player
-
Bluetooth
®
-
2.
HFP (Incoming / out-
going
Calls), text messages,
telephone contacts,
Bluetooth
®
player
-
HFP (incoming calls),
Bluetooth
®
player
Data connection
Bluetooth
®
-
3.
HFP (Incoming / out-
going
Calls), text messages,
telephone contacts,
Bluetooth
®
player
-
-
Incoming calls,
text messages
Data connection
Bluetooth
®
-
4.
-
incoming / outgoing
Calls, text messages,
Phone contacts
Data connection
HFP (incoming calls),
text messages
Bluetooth
®
player
-
,
Bluetooth
®
Bluetooth
®
a)
In every connection variant, there is an option to only connect an external device as a Bluetooth connection
®
player with Infotainment.
b)
If phone contacts from the third device are imported into infotainment, the telephone contacts of the SIM card inserted in the external module cannot be used.
Applies to Infotainment Amundsen, Bolero
The first device (main phone)
The second device (additional
phone)
HFP (Incoming / outgoing calls), SMS,
telephone contacts,
Bluetooth
®
player
HFP (incoming calls),
Bluetooth
®
a)
Only an external device can be connected to Infotainment as a Bluetooth
®
player.
Applies to Infotainment Swing
The first device (main phone)
The second device (additional
phone)
HFP (Incoming / outgoing calls),
telephone contacts,
Bluetooth
®
player
Bluetooth
®
player
a)
Only an external device can be connected to Infotainment as a Bluetooth
®
player.
161
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Managing paired external devices
›
In the Telephone main menu, tap on the function surface → Bluetooth →
Paired devices.
In the list of paired external devices, the following symbols may appear for the
individual external devices.
Applies to Infotainment Columbus, Amundsen, Bolero
Symbol
Symbol
colour
Operation
Grey
External device can be connected as telephone
Green
External device is connected as telephone
Grey
External device can be connected as Bluetooth
®
play-
er
White
External device is connected as Bluetooth
®
player
Applies to Infotainment Columbus with SIM card inserted in external mod-
ule
Symbol
Symbol
colour
Operation
Grey
External device can be connected to use telephone
contacts and the text message function from this ex-
ternal device
blue
External device is connected and telephone contacts
and the text message function from this external de-
vice can be used
Applies to Infotainment Swing
Symbol
Symbol
colour
Operation
White
External device can be connected as telephone
Green
External device is connected as telephone
White
External device can be connected as Bluetooth
®
play-
er
Green
External device is connected as Bluetooth
®
player
Connection set-up
▶
Select the desired external device from the list of paired external devices.
▶
Select the desired profile from the list of available Bluetooth
®
profiles - .
If external Bluetooth
®
devices are already connected to Infotainment, then dur-
ing the Infotainment connection process, messages and options for the possi-
ble connection type (e.g. replacement of the connected external Bluetooth
®
device) are displayed.
Disconnection
▶
Select the desired external device from the list of paired external devices.
▶
Select the desired profile from the list of available Bluetooth
®
profiles - .
Delete the paired external device
▶
To delete, tap on one of the following function surfaces.
- Delete all external devices
- Delete the desired external device
▶
Confirm the deletion by tapping on the function surface Delete.
Use the SIM card in the external module
Applies to Infotainment Columbus with the SIM card slot in the external mod-
ule.
Fig. 194 Insert SIM card in the external module
A SIM card size “mini” (standard size 25x15 mm) must be used.
The SIM card can be used for phone and data services.
The SIM card slot is located in an external module in the storage compartment
on the front passenger side
Delete all or All areas
162
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Switching SIM card use on / off in the external module
›
In the Telephone main menu, switch on the → Business phone “interface”.
Insert SIM card
›
Insert the SIM card into the appropriate slot
corner on the left and the contacts facing downwards until it “locks”.
Use the SIM card for the first time
When using the SIM card in the external module, select the use type.
Calls too - enabling data and telephone services.
Only data connections - enabling of data services only.
Set the network parameters for Internet connection if required
.
By using the SIM card for phone services, the connection to the connected
phones is terminated.
Enter the PIN code and save
›
If the SIM card is protected by a PIN code, then the PIN code of the SIM card
must be entered.
›
Confirm the entered PIN code by tapping confirm.
›
or: Tap the functional surface to save and confirm the PIN code.
Change PIN code
›
The PIN code can be changed in the Telephone main menu, in the → PIN
setup → Change PIN menu item
Changing SIM card usage
›
In the main Telephone menu, tap the function surface → Use SIM card only for
data connection function surface.
Remove SIM card
›
Press the inserted SIM card and remove it.
CAUTION
■
When inserting an incorrectly sized SIM card, there is a risk of damage to the
external module.
■
Avoid using an adapter for the SIM card as the SIM card may fall out while
driving due to vehicle vibrations - There is the risk of damage to the external
module.
Telephone functions
Enter telephone number and select
Enter a telephone number and dial
›
In the Telephone main menu, tap on the function surface .
Function surfaces of the numerical keyboard
Enter the last dialled number / dial the telephone number entered
Emergency call (Only applies to some countries)
Breakdown call in case of breakdown
Information call (for information regarding the products and services of
the brand ŠKODA )
Choosing the mailbox number (the function is not supported for Info-
tainment Swing)
Delete the last number entered
Display of function surfaces for the movement of the cursor in the
input line
Search for a contact using the numeric keypad
The numeric keypad can also be used for a contact search.
For example, if you enter 32, the unit will display contacts with the letter se-
quence DA, FA, EB, etc. next to the numerical keypad.
Voicemail box (does not apply to Infotainment Swing)
▶
To select the voice mailbox number, tap the function surface .
If not import the voicemail number or was not imported or entered, then this
can be entered or changed as follows.
▶
In the Telephone main menu, tap on function surface → User profile → Mailbox
number:.
▶
Enter the number of your voice mailbox.
163
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
List of telephone contacts
Fig. 195 List of telephone contacts / contact details
›
In the Telephone main menu, tap on the function surface and a list of tele-
phone contacts will be displayed
.
The main telephone is connected to Infotainment, the telephone contacts
from the telephone are used.
If a SIM card with activated telephone services is located in the external mod-
ule of Infotainment Columbus, the SIM card telephone contacts are available.
Another external device to import telephone contacts can be selected by tap-
ping the function surface
F
Functional surfaces
Contact search
Dial a number in the telephone contact list (if a telephone contact contains
several telephone numbers, a menu containing the telephone numbers as-
signed to this contact is displayed after the contact is selected)
Display the contact details
Select the telephone number in the contact details
Edit the telephone number of the contact before dialling
Infotainment Columbus, Amundsen, Bolero:
The contact name can be read out by Infotainment’s generated voice
Open the menu for sending a text message (SMS)
Infotainment Columbus, Amundsen:
Start the route guidance to the contact address
A
B
C
Import list
After the primary telephone and/or the SIM card (applies to Infotainment Co-
lumbus) connects to the infotainment system for the first time, the import of
the telephone contacts to the infotainment memory starts. The import can
take several minutes.
In the infotainment phonebook, there are 4000 (applies to Infotainment Co-
lumbus) and 2000 (applies to Infotainment Amundsen, Bolero, Swing) free
storage locations for imported telephone contacts. Each contact can contain
up to 5 telephone numbers.
The number of imported contacts can be determined in the menu item →
User profile → Import contacts: or Import contacts.
If an error occurs during the import, an appropriate message appears on the
screen.
Refresh list
When the telephone reconnects with Infotainment, the list is automatically up-
dated.
The update can be carried out manually as follows.
▶
In the Telephone main menu, tap on function surface → User profile → Import
contacts: or Import contacts.
Management of preferred contacts (favourites)
Fig. 196
Favourite contacts
Assigning favourites
›
In the main menu Telephone, tap on the desired function surface
A
›
Select the desired contact (if required, one of the contact numbers).
164
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Connecting to a favourite
The function surfaces of preferred contacts allow the contact telephone num-
bers to be dialled immediately.
The favourites are available in two storage groups.
›
To the change Storage Group tap on the functional surface
B
›
To dial, tap the assigned function surface
A
Change allocated favourites
›
In the main Telephone menu, press and hold the desired function surface
A
›
Select the desired contact (if required, one of the contact numbers).
Delete a favourite
›
In the Telephone main menu, tap on function surface → User profile → Manage
favourites.
›
Press the desired function surface of the preferred contact and confirm the
deletion.
You can delete all contacts by tapping on the function surface Delete all / All
areas and confirming the delete process.
Function surface for emergency call
If the vehicle is not equipped with the buttons for the Care Connect service
, the position of the last function surface in the first group of favour-
ites will show the function surface for an emergency call is displayed in the
status bar. In some countries, this function may not be available.
The function surface can be assigned a different number for the preferred
contact.
To restore the emergency number, it is necessary to remove the telephone
from the list of paired external devices
nect again.
Call list
Fig. 197 Call history / Contact details
›
In the Telephone main menu, tap on the function surface and a call list will
be displayed
The call list can also be displayed during a telephone call.
Functional surfaces
Setting the display depending on the type of call
▶
All areas - List of all calls
▶
Missed calls/Missed calls - List of missed calls
▶
Dialled numbers - List of dialled numbers
▶
Received calls / Received calls - list of received calls
Dial the contact number/telephone number
Call type symbols
▶
- Answered call
▶
- Outgoing call
▶
- Missed call
Edit the phone number before dialling (not applicable to Infotainment
Swing)
Display the contact details
▶
C
- Dial the contact number
Phone call
Depending on the conversation context, the following functions can be carried
out.
End dialling / reject incoming call / end call
Accept incoming call / return to held call
A
B
165
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Switch on/off ringer
Hold a call
Switch off/on microphone
Infotainment Columbus, Amundsen, Bolero:
Set up a conference call
Show caller details (if the contact is stored in the list)
Switch on/off hands-free (call to the telephone / switch to Infotainment)
▶
To switch off the hands-free system, in the Telephone main menu, tap on the
function surface →Tap on Hands-free during a call.
▶
To switch off the hands-free system, tap on the function surface during a
call.
Conference
Applies to Infotainment Columbus, Amundsen, Bolero.
The conference call is a shared call with between three and six participants.
Start a conference call/invite additional participants
›
During a call/conference call, carry out the next call.
›
or: Take the new incoming call by tapping the function surface
.
›
To initiate conference call or return to the conference call, tap on the func-
tion surface .
Ongoing conference call
During an ongoing conference call, the call duration is displayed on the screen.
Depending on the context, the following functions can be selected.
Hold a conference call - leave the conference call temporarily (the con-
ference call continues in your absence)
Return to the held conference call
Switch off/on microphone
End conference call
Display conference call
Conference details
▶
During the ongoing conference call, press the function surface .
A list of other conference participants is displayed. The following functions
can be selected depending on the type of telephone.
Display details of participant
Talk to a participant separately from the conference call
End the call to a conference participant
Text messages (SMS)
Main menu
Applies to Infotainment Columbus, Amundsen, Bolero.
Fig. 198
Main menu text messages
›
In the Telephone main menu, tap on the function surface The main menu
for text messages appears
›
If required, select whether the SIM card inserted in the external module or
the telephone (applies to Infotainment Columbus) is to be used as the source
of the text messages.
Depending on your model of connected telephone, you can perform the fol-
lowing functions.
Opening a list of templates for quick answers
New text message - Creating and sending the message
Inbox- Open a list of received messages
Sent - Open a list of sent messages
Outbox - Open a list of messages not sent
Drafts- Open a list of drafts (messages in progress)
Deleted- Open a list of deleted messages
Send contact details - Send contact details (business card) (applies to Info-
tainment Columbus)
Select source of text messages (applies to Infotainment Columbus)
A
166
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Display for the selection of the source of text messages (this applies to the
Infotainment Columbus with the SIM card slot in the external module)
If a SIM card used only for data services is located in the external module and if
a phone that supports the Bluetooth
®
profile MAP is connected to Infotain-
ment, then it is possible to adjust the source from which a text message menu
will be displayed after tapping on the function surface in the main Telephone
menu.
▶
In the Telephone main menu, tap on the function surfaces → Text message
settings → Standard account.
▶
Select the desired menu item.
New text message
Creating and sending the message
›
In the main menu of the text messages, tap on function surface inter-
face
›
Write a text message and confirm. A view of the text message is displayed.
›
Tap the function surface .
›
Select the recipient of the message from the displayed contact list or tap on
the and enter the telephone number.
›
To add additional recipients, tap on the function surface .
›
To send the text message, tap the function surface .
Viewing the text message
After opening the view message function, the following functions can be exe-
cuted.
The text can be read out by the device's generated voice
The text can be stored as a draft
Open a list of templates with the option to replace the recorded text with
the selected template
Open the contact list
The message can be edited, as long as the text range is within the entered
view.
Contact list
After the list has been opened the following functions can be executed.
Insert a contact in the recipient list
Enter the telephone number
Return to view the message
Tap on the Find function surface to open a list of available telephone contacts.
After selecting the contact number or entering the telephone number, the re-
cipient list will be displayed in the screen.
Recipient list
The following functions can be executed by tapping on one of the functional
surfaces.
Display contact list with the option of adding/removing additional re-
cipients (tap on the function surface to return to the recipient list .
Removal of the contact from the recipient list
Sending the message
Return to view the message
Received text message
When you receive a new message, the number of new messages received is
displayed within the function surface and at the same time the icon in the
status bar is displayed in the status bar.
›
To open a list of received messages, go to the Telephone main menu and
tap on function surface → .
›
Select a message.
The message content and the following menu is displayed.
The text can be read out by the device's generated voice
Display a menu with additional options
▶
Reply with template - Reply using a template
▶
Delete current text message - Distance of displayed text message (applies to
Infotainment Columbus, when the SIM card is inserted in the external
module or the phone is connected via the Bluetooth
®
profile RSAP)
▶
Display numbers - Recognition of telephone numbers in the message in-
cluding the contact number (recognised numbers can be dialled directly
or edited before dialling, or may be sent to this message)
Forwarding a message with the option to edit the message before sending
Reply to the sender via a message
167
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Data connection
Internet connection
Infotainment Columbus
Fig. 199 WLAN (Wi-Fi) / Bluetooth® / SIM card
Possible connection types
Using WLAN, by connecting the Infotainment system to the hot spot of
the external device
, Connect Infotainment to the hotspot of
the external device.
By connecting to a mobile phone (it is connected to the Internet) using the
Bluetooth
®
rSAP profile
, Establishing a connection using the
Using a SIM Card with a data tariff
using a SIM card in the external module.
A
B
C
Connecting Infotainment Amundsen
Fig. 200 WLAN (Wi-Fi) / CarStick
Possible connection types
Using WLAN, by connecting the Infotainment system to the hot spot of
the external device
, Connect Infotainment to the hotspot of
the external device.
Using the CarStick USB device
.
Connecting via the CarStick device
Applies to Infotainment Amundsen.
The CarStick USB device can be purchased from the original accessories.
›
Insert a SIM card with activated data services into the CarStick device.
The required dimensions of the SIM card, as well as the correct procedure dur-
ing insertion can be found in the instructions enclosed with the CarStick ŠKO-
DA original accessory.
›
Turn on the ignition and switch on Infotainment.
›
Insert the CarStick into the USB input at the front
›
Wait approximately one minute until the red light on Carstick stays continu-
ously lit (if the red lights up, then disconnect and re-insert the Carstick).
›
If the SIM card is protected by a PIN code, then the PIN code of the SIM card
must be entered.
›
Confirm the entered PIN code by tapping confirm.
›
or: Tap the functional surface to save and confirm the PIN code.
A
B
168
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
›
If necessary, set the required network of the data service provider.
If your data provider is not available in the list, ask your provider whether one
of the displayed providers can be used.
The parameters of the telephone service provider network can be set in the
menu item
→ → Network → Network settings.
CAUTION
If you insert a SIM card of the wrong size or in the wrong direction, there is a
risk of damage to the CarStick device.
Establishing a connection using a SIM card in the external module
Applies to Infotainment Columbus with the SIM card slot in the external mod-
ule.
A SIM card size “mini” (standard size 25x15 mm) mit enabled data services
must be used.
›
Turn on the ignition and switch on Infotainment.
›
In the Telephone main menu, switch on the → Business phone “interface”.
›
Insert a SIM card into the corresponding slot into the external module in the
storage compartment on the passenger's side
Insert the SIM card with the bevelled corner on the left and the contacts
facing downwards until it “locks”.
›
Select the SIM card usage type:
Calls too - enabling data and telephone services.
Only data connections - enabling of data services only.
›
If the SIM card is protected by a PIN code, then the PIN code of the SIM card
must be entered.
›
Confirm the entered PIN code by tapping confirm.
›
or: Tap the functional surface to save and confirm the PIN code.
›
Set the data service provider’s required network and confirm the Internet
connection.
If your data provider is not available in the list, ask your provider whether one
of the displayed providers can be used.
The parameters of the telephone service provider network can be set in the
menu item
→ → Network → Network settings.
The data connection setting using the SIM card can be configured in the menu
item
→ → Network → Data connection:.
CAUTION
When inserting an incorrectly sized SIM card or in the wrong direction, there is
a risk of damage to the external module.
Establishing a connection using the Bluetooth
®
rSAP profile
Applies to Infotainment Columbus with the SIM card slot in the external mod-
ule.
The prerequisite for establishing an Internet connection is using a telephone
with a SIM card with active data services.
›
Turn on the ignition and switch on Infotainment.
›
Switch on the “Business” function in Infotainment, and tap on the sensor field
and then the function surface → → Phone interface “Business”.
›
Switch on Bluetooth
®
, tap on the sensor field
and then the function sur-
face → Bluetooth → Bluetooth.
›
Turn on Infotainment visibility (tap on the sensor field
and then tap the
function surface → Bluetooth → Visibility: → Visible.
›
Switch on Bluetooth
®
and its visibility in the phone.
›
Connect and pair the phone with Infotainment
.
Connecting via WLAN
Introduction to the subject
Applies to Infotainment Columbus, Amundsen.
WLAN can be used to connect to the Internet, to playback audio files in the
menu media or for operating the Infotainment system using an application in
the external device (e.g. “ŠKODA Media Command”).
It is possible to connect up to 8 external devices to the Infotainment hotspot
and at the same time to connect Infotainment to another hotspot.
Switching the Infotainment hotspot on/off
›
Switch on the ignition.
›
Switch the hotspot on/off in menu item
→ → WLAN → Mobile hotspot →
Mobile hotspot.
169
Data connection
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Setting the Infotainment hotspot
The Infotainment hotspot is factory set.
The setting can be changed in menu item
→ → WLAN → Mobile hotspot →
Hotspot (WLAN) settings.
■
Security level: - Type of access protection (always set to WPA2)
■
Network key - Access password
■
SSID: ... - Hotspot name
■
Do not send network name (SSID) - Switch the visibility of the hotspot on/off
▶
To save the configured parameters, tap the Store function surface.
Connecting an external device to the Infotainment hotspot
›
Switch on the ignition.
›
Switch on WLAN in the external device and search for the infotainment hot-
spot.
›
Select the Infotainment hotspot and enter the required password.
›
Confirm the connection.
Note
The name of the infotainment hotspot (SSID) and the access password can be
found in menu item
→ → WLAN → Mobile hotspot → Hotspot (WLAN) settings.
Connect Infotainment to the hotspot of the external device
Fig. 201
Main menu of the Infotainment
WLAN
The Infotainment system can only be connected to a hotspot with WPA2
access protection.
›
Switch on the ignition.
›
If the Infotainment WLAN is not activated, activate it in the menu item
→
→ WLAN → WLAN → WLAN.
In area
A
, a list of available or previously connected hotspots is dis-
played.
The hotspot list can be updated by tapping the function surface
B
.
›
Select the hotspot and enter the password.
If the hotspot is not visible, you can establish the connection to it manually.
›
Tap the function surface Manual settings.
›
Set the required hotspot parameters.
›
Tap the function surface Connect.
Icons and function surfaces in the list of available hotspots
A
Connected hotspot
Signal strength of the connected hotspot
Delete the hotspot
Hotspot connection recommendations
▶
Only leave the hotspot to be connected switched on, switch off the other
hotspot.
▶
On some hotspots, the connection setup takes longer, wait for the end of
the connection setup.
▶
If the connection is interrupted, search for available hotspots again and re-
peat connection setup.
▶
Delete unused hotspots. This shortens the time required for connection set-
up.
Note
■
It is not possible to connect Infotainment Columbus to the hotspot of the ex-
ternal device as long as a SIM card with enabled data services is in the external
module of Infotainment or a phone connected to Infotainment via the Blue-
tooth
®
rSAP profile.
■
An Infotainment Amundsen connection with external device hotspot is not
possible, as long as there is an active connection using the Carstickdevice.
Connect via WPS
Applies to Infotainment Amundsen.
It is not necessary to enter the access password when connecting via WPS.
170
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Connecting the Infotainment system to the hotspot of the external device
›
Switch on the ignition.
›
In the external device, switch on the hotspot, its visibility, and the WPS con-
nection option.
›
In the Infotainment system, switch on WLAN in menu item
→ → WLAN
→ WLAN → WLAN.
›
Tap the function surface WPS quick connection (WPS button).
Connecting the external device to the Infotainment hotspot
›
Switch on the ignition.
›
Switch on the Infotainment hotspot in menu item
→ → WLAN → Mobile
hotspot → Mobile hotspot.
›
Tap the function surface WPS quick connection (WPS button).
›
In the external device, switch on the WPS connection option.
SmartLink
Introductory information
Introduction to the subject
Fig. 202
Information on SmartLink on the
ŠKODA websites
SmartLink offers the option to display certified applications on an external de-
vice equipped with a USB device on the Infotainment screen and to operate
them.
SmartLink supports the following communication systems.
▶
“Android Auto”
▶
“Apple CarPlay”
▶
“MirrorLink
®
”
Using the applications in the connected external device, you can use navigation
to make a call and to listen to music.
For reasons of safety, the operation of some applications while driving is not
possible or only limited.
Read in the QR code
orenter the following address in the web brows-
er to open the website with information on the SmartLink system.
http://go.skoda.eu/connectivity-smartlink
Depending on the model of the connected external device, some applications
can be operated via the Infotainment system, using your voice or using the
buttons on the multi-function steering wheel.
To activate voice control for the connected external device, hold down
or
or hold down the button on the multifunction steering wheel.
171
SmartLink
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CAUTION
To establish the connection, it is necessary that the date and time in Infotain-
ment are set correctly. If the date and time setting is based on the GPS signal,
then problems may arise with establishing a connection with a poor GPS signal
reception.
Note
■
We recommend that you use extension cables from ŠKODA Original Acces-
sories.
■
With some connected external devices, it is necessary for the connected ex-
ternal device to be “unlocked” for trouble-free functioning of the SmartLink
function.
Main menu
Fig. 203 Supported communication systems / Example of available
communication systems of the connected external device
›
to display the SmartLink main menu, tap on the sensor field
or press the
button.
›
or: Tap the
sensor field and then the function surface .
If no external device is connected, then a menu with supported communica-
tion systems SmartLink is displayed
A
,
Main menu
Supported communication systems
Available communication systems of the connected external device
Display of information about SmartLink
Disconnection of the active connection
Settings of the SmartLink
A
B
Android Auto
Connection set-up / disconnection
Prerequisites for establishing a connection
The external device to be connected must support the “Android Auto”
communication system.
In the external device to be connected, the “Android Auto” application
must be installed.
Some applications require the data connection in the connected external
device to be switched on.
A list external of devices, supported regions and applications that the “Android
Auto” connection supports can be found on the websites of Google Inc..
Connection set-up
›
Switch on the ignition.
›
Switch on the Infotainment system.
›
Switch on the external device.
›
Connect the external device to the USB input using a cable
›
Select the connection using “Android Auto”
B
Disconnection of the active connection
›
In the “Android Auto” main menu, tap the function surface .
›
Tap the “ŠKODA” function surface to go back to the main menu SmartLink.
›
Tap the function surface .
›
or: Disconnect the cable from the USB input. When reconnected, the exter-
nal device is automatically connected.
Function restriction of Infotainment
For the duration of the connection, the external device cannot be used as an
audio source in the Media menu.
By connecting the external device with “Android Auto”, all currently connected
Bluetooth
®
devices will be disconnected and the external device will automati-
cally be connected as the main telephone.
For the duration of the connection, no Bluetooth devices can be connected to
the infotainment system. The SIM card inserted in the external module can on-
ly be used for data connection.
172
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст