Dacia Solenza (engine E7J). Service manual — part 55
CLUTCH
20
20 - 8
SPECIAL TOOLS
MOT 582 Flywheel immobilizing sector
.
Engine flywheel
TIGHTENING MOMENTS (daNm)
Flywheel screws
5 ÷ 5,5
REPLACEMENT
This operation is to be performed after dismounting the clutch mechanism and the gearbox.
DISMOUNTING
Mount the immobilizing sector MOT 582.
Dismount the flywheel attachment screws.
The screws are not to be reused.
Dismount the engine flywheel.
REMOUNTING
Clean the holes thread from the crankshaft by means of a dry gauze.
Degrease the flywheel seating surfaces on the crankshaft.
Mount the flywheel with new screws (the screws thread shall be lubricated with
LOCTITE FRENETANCH).
Tighten the screws to the required moment.
Dismount the immobilizing sector MOT 582
REMARK
The flywheel attachment screws are to be replaced after each dismounting.
CV JH3 - 051
21
MECHANICAL GEARBOX
21 - 1
Sectional view
CV JH3 - 051
21
MECHANICAL GEARBOX
21 - 2
Identification
A - type of gearbox
B – index of gearbox
C – manufacturer’s series
D – the code for the manufacturing
000
000
0
000000
A
B
D
C
CV JH3 - 051
21
MECHANICAL GEARBOX
21 - 3
Tightening moments in daNm
TIGHTENING MOMENTS (daNm)
Attachment screws of the mechanism crankcase on the
clutch – differential case
2.5
Secondary shaft screw
7
Primary shaft nut
19
Back cap fixing screws
2.5
Oil draining plug
2.5
Reverse driving contact
2.5
Screws for fixing the bellows assembly – left transmission cap assembly
2.5
Screws for fixing gearbox on engine case (M10 – 90)
4.4
Screws for fixing gearbox on engine case (M10 – 35)
2.1
Nuts for fixing gearbox on engine
4.4
LOCTOU blocking element fixing screw
0.5
Screws for fixing RPM sensor on the clutch case
0.8
Screws for fixing the control axle assembly
2
Screws for fixing clutch cable support
4.8
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст