Dacia Solenza (engine E7J). Service manual — part 152
INSTRUMENT PANEL
83
83 - 2
Instrument panel with RPM meter
83
INSTRUMENT PANEL
83 - 3
Connector D (gray)
Pin Denomination
1.
Mass
2.
Free
3.
Free
4.
Free
5.
Water temperature alert
6.
Oil pressure alert
7.
Battery charging indicator
8.
Fog lamp indicator
9.
Fog projectors indicator
10.
Right turning indicator
Connector C (black)
Pin Denomination
1.
Free
2.
Free
3.
Free
4.
Handbrake indicator / ICP braking
system
5.
Free
6.
Anti-starting indicator
7.
– Fuel level transmitter
8.
Fuel level signal
9.
Free
10.
+ Battery
Connector A (white)
Pin
Denomination
1.
Left turning indicator
2.
Meeting lights indicator
3.
Road lights indicator
4.
Rear windscreen defrosting indicator
5.
Free
6.
Free
7.
Free
8.
+ Parking lights
9.
Water temperature indicator
10.
Free
Connectors disposal
Connector B (brown)
Pin
Denomination
1.
Vehicle speed signal
2.
Engine RPM signal
3.
Free
4.
Free
5.
+ After contact
6.
Driver safety belt indicator
7.
OBD indicator
8.
Free
9.
Free
10.
+ After contact
INSTRUMENT PANEL
83
83 - 4
DISMOUNTING
Disconnect the battery (-) terminal.
Dismount the 3 attachment screws of the steering wheel half-casing, by means of a TORX 20
screwdriver.
Detach from clips the steering wheel half-casings and remove them.
By means of a TORX 20 wrench (“L” shaped), dismount the side attachment screws of the
upper dashboard.
By means of a TORX 20 screwdriver dismount the two front attachment screws of the upper
dashboard.
Detach from the three clips of the windscreen lower crossbeam, the upper dashboard.
Dismount the radio-tape player from the upper dashboard (if the vehicle is equipped with
radio): press its side clips and extract it from the upper dashboard. Disconnect the antenna’s
connector and the radio-tape two connectors.
Disconnect the central locking switch connector (if the vehicle is provided with central locking).
Remove the upper dashboard towards vehicle right part.
By means of a TORX 20 screwdriver, dismount the attachment screws of the instrument
panel on the lower dashboard.
Disconnect the four connectors of the instrument panel. Mark the identification mounting
position of the connectors.
REMOUNTING
Perform the dismounting operations in the reverse order.
Perform functional tests of the instrument panel.
OBSERVATION: After battery reconnecting, re-program the clock and for the
vehicles equipped with programmable radio, reinsert the radio code.
Perform functional instrument panel
83
INSTRUMENT PANEL
83 - 5
The instrument panel (speedometer, mileage) and the speed limit alert
*
are receiving the
information regarding vehicle speed from an electronic transducer.
This information is also used by the UCE injection.
Connector
Pin
Denomination
A
Supply after contact (+DC)
B1
Vehicle speed signal
B2
Mass
* For vehicles with speed limit alert.
Speed transducer
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст