Dacia Solenza (engine E7J). Service manual — part 2
![](/vehicle/xxoukarav/goullaueetou/moh/yowaknd.png)
01 - 5
APV IDENTIFICATION DATA
1.1Code type auto APV
1.2Manufacturing number
2.1 Equipping level code
2.2 Additional code for limited serial
definition
2.3 Additional code for special serial
definition
3.1 Carriage body color code
3.2 Seats upholstery code
3.3 Interior matching code.
4.1 Technical definition code
4.2 Optional equipping code.
A
C
D
F
B
H
G
I
J
E
MANUFACTURER’S
IDENTIFICATION DATA
A. Manufacturer’s name
B. Community reception number or
homologation
number.
C. Identification number.
D. Total authorized weight of the
loaded vehicle.
E. Total authorized running weight
F. Total weight on front axle.
G. Total weight on rear axle.
H. Additional inscription.
I. Manufacturing date inscription
J. Consignment number.
The MANUFACTURER PLATE, self-adhesive type, has the bellow presented con-
figuration, with two distinctive areas, presenting :manufacturer’s identification data and
APV type identification data.
01
CHARACTERISTICS
STARTING WITH THE DATE OF 26.06.2003
Vehicle identification
![](/vehicle/xxoukarav/goullaueetou/moh/pesee.png)
02 - 1
02
LIFTING MEANS
Safety sign (particularly cautions to be observed in case of an intervention)
SPECIAL TOOLS
Cha 280-02 Adequate support on mobile jack
Cha 408-01 Adjusting support on mobile jack
Cha 408-02 Adjusting support on mobile jack
Mobile jack – Adjustable supports
The use of a mobile jack implies the
obligatory use of adjustable supports.
It is forbidden the vehicle lifting using
other supporting points (suspension arms, etc)
than the ones provided by manufacturer.
LATERAL MOBILE JACK
In order to lift vehicle front or rear part,
the same supporting points provided for the
vehicle jack are to be used.
This t ype of jack, is using sockets
(supports) Cha 408-01 or Cha 408-02,
equipped with the support Cha 280-02.
Place it on under the threshold at the front
door level and the floor closing plate shall be
positioned in the channel of the support.
ADJUSTABLE SUPPORT S
The adjustable supports, may be placed under
the carriage body, in two ways:
-
under the reinforcements provided for the
lifting vehicle with the vehicle jack;
-
under the supports placed behind the
reinforcements.
The positioning of the adjustable supports in
the vehicle rear areas is performed by lateral lift-
ing of the vehicle, by means of a mobile jack.
![](/vehicle/xxoukarav/goullaueetou/moh/ueeca.png)
02 - 2
LIFTING MEANS
FRONT
02
Elevator positioned under vehicle body
SAFETY SIGN
Situations to be considered:
1. SITUATION OF VEHICLE COMPONENTS DISMOUNTING
When there are not available four columns elevators, two columns elevators may be used, in
this case, lifting slides shall be placed under the floor closing plate, at the supporting points level
of the vehicle jack
2. PARTICULARLY SITUATION OF POWER-TRAIN DISMOUNTING – RE-
MOUNTING
In this s pecific case, the vehicle carriage body shall be consolidated with the two columns
elevator arms using special slides.
REAR
These must be obligatory placed at the right of the supporting points of the vehicle jack and
must be locked in the holes/windows made in the floor closing plate.
![](/vehicle/xxoukarav/goullaueetou/moh/end.png)
03 - 1
03
TOWING
ATTENTION !
NEVER USE AS TOWING POINTS, THE TRANSMISSION AXLES (PLAN-
ETARY SHAFTS).
The towing points, front, or rear, are to be used only for vehicles towing on wheels.
These points cannot be anyhow used for drawing out the damaged vehicle from a trench
(hole), or for direct or indirect vehicle lifting on a transport platform.
FRONT (right) REAR (left)
All types
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст