Dacia Solenza (engine E7J). Service manual — part 11
ENGINE
E7J-262
10
ENGINE ASSEMBLY
10 - 19
- clearance B (mm):
- minim 0.02
- maxim 0.86.
ATTENTION!
Protect the distribution belt and the accessories belt in order to avoid the water and
cleaning materials splashing on them.
Characteristics
OIL PUMP
The oil pump is a gear wheels type.
Oil minimal pressure at 80°C is :
- at idling 1 bar
- at 4000 rpm 3 bar
Dismount the oil pump and check the
gearing clearances.
Check:
- clearance A ( mm)
- minim 0.110
- maxim 0.249
ENGINE E7J-262
10
ENGINE ASSEMBLY
10 - 20
CYLINDER HEAD
Dismounting – Remounting
ENGINE
E7J-262
10
ENGINE ASSEMBLY
10 - 21
CYLINDER HEAD DISMOUNTING
Drain the oil from the engine.
Dismount:
- wiring from the engine;
- compressor and/or power steering pump ( for vehicles equipped with air conditioning
unit and/or power steering);
- compressor support and/or power steering pump support;
- alternator and its belt.
Dismounting – Remounting
Block the engine flywheel by means of the
MOT 582 device.
Dismount :
- oil dipper rod support;
- alternator belt tightening clamp;
- crankshaft pulley or pulleys ;
- pulley hub;
- distribution belt casings.
ENGINE E7J-262
10
ENGINE ASSEMBLY
10 - 22
Bring the engine at the setting on point, lining up the mark from the crankshaft gear L with the
fix mark M (the mark L from the camshaft being in vertical position as shown in the bellow
drawing).
Dismount the nut (0) of the tightening roller, then dismount the distribution belt.
REMARK :
(1) is representing the acting direction of the tightening roller for distribution belt
tensioning.
Dismounting – Remounting
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст