Dacia Solenza (engine E7J). Service manual — part 110
OUTSIDE PROTECTIONS
55
55 - 6
Side ornaments
DISMOUNTING
Side ornaments of the front panels, doors and wings, are to dismounted by unstuck.
Carefully clean the place from where ornaments have been detached, with an adequate sol-
vent and wipe with soft and dry cloth.
REMOUNTING
Position the centering spurs (1) of the side ornaments in the wholes provided in the doors
panels and attach them by sticking.
The side ornaments for wings are to be aligned with the side ornaments of the panels and are
to be attached by easy and uniform pressing.
1
OUTSIDE ACCESSORIES
56
56 - 1
External rear view mirror
DISMOUNTING
Extract the interior ornament (3) by gliding the two pins in the existing bushings (2) in the front
door caisson. For the external rear view mirror, controlled by cables, loosen the attachment
screw of the external rear view mirror control on the inside ornament, releasing so, the rear view
control (5).
Dismount the three plastic self-tapping screws (4), attaching the outside rearview mirror,
releasing it together with the gasket.
REMOUNTING
Perform the dismounting operations in the reverse order.
After fixing the outside rear view mirror, line up the two pins of the control cables attachment
extremity and insert them in the channel provided in the interior ornament, attaching it by tighten-
ing the its screw (only for outside rear view mirror, cables controlled).
4
5
1
2
3
3
2
1
4
OUTSIDE ACCESSORIES
56
56 - 2
Spare wheel support
DISMOUNTING
Remove the safety (3) from the threaded driving axle (5).
Dismount the driving axle from the nut welded on the support (4) attached by means of the
screws (2) to the rear extreme cross member.
Release the spare wheel support (6) from the welded supports (1).
REMOUNTING
Perform the dismounting operations in the reverse order.
5
6
1
1
2
4
3
OUTSIDE ACCESSORIES
56
56 - 3
Front wheels fairing
DISMOUNTING
Lift the vehicle by means of a two-column elevator.
Dismount:
- front wheels;
- right front wheel fairing (2), (5) and left front wheel fairing (7), from attachment clips (6)
and (8), consequently from screws (4) and (9) of the front wheels passages;
- protectors (1) and (3) from attachment screws (10) consequently (11).
4
10
9
1
2
3
11
5
6
7
8
REMOUNTING
Perform the dismounting operations in the reverse order.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст