Dacia SuperNova (engine E7J). Service manual — part 86
40
GENERAL
40 - 12
1
2
For checking, straightening or repairing the DACIA vehicles bodies, the use of the
CELLETTE bench is recommended.
The checking/straightening bench type CELETTE ( service code CAR 500 ) is composed of:
- CAR 501 (1 mobile bench with four wheels, four parts for vehicle anchoring, one
traction arm of 10 t, type
“
CAIMAN“).
- CAR 502 - set modular cross bars
- CAR 503 - set of 22 towers MZ
- CAR 504 - set accessories for traction
- CAR 505 - set of specific supports for DACIA Bl, Bk
- CAR 506 - set of specific supports for DACIA 1304, 1307
- CAR 507 - set of specific supports for DACIA NOVA.
NOTE
The purchase of the checking / straightening bench - CELETTE type- is to be done
through Automobile Dacia S.A.
1. CAR 501
The mobile bench (1) is provided with four anchoring parts (2) - (fig 1), which can be
used when a carriage body straightening operation is performed.
(pict.1)
CARRIAGE BODY CHECKING/ STRAIGHTENING
BENCH CELETTE TYPE
40
GENERAL
40 - 13
CARRIAGE BODY CHECKING / STRAIGHTENING BENCH
CELETTE TYPE
To straighten the vehicle body, CELETTE bench is provided with a traction arm of 10
tons, Caiman type, 250-mm stroke of the hydraulic cylinder, with rapid anchorage on any
side of the mobile bench ( pict. 2 ).
2. CROSS BARS MODULAR SET ( CAR 502)
CELETTE bench has in its composition, five modular cross bars (pict.3), as follows:
- two front cross bars A and B (T shaped) which are always in the same position
(towards front of bench) - pict. 4 .
- two straight cross bars C1 and C2 and one D cross bar (U-shaped) which may be
placed in different positions subject to the vehicle type.
The marked figures (14. 36) are engraved on the mobile bench, every mounting
being supplied with a drawing indicating the exact position of the modular crossbars subject
to the vehicle type.
( pict.3 )
(
pict.4
)
( pict. 2)
one.
two...
and tree!
A
B
C
2
D
A
B
C
1
40
GENERAL
40 - 14
CARRIAGE BODY CHECKING / STRAIGHTENING
BENCH CELETTE TYPE
3.TRACTION ACCESSORIES SET ( CAR 504)
CELETTE bench is equipped with a traction accessories set CAR 504, which allows
the operator to achieve different anchoring when a body strengthening is performed (pict.5).
4. SET OF MZ TOWERS AND SPECIFIC SUPPORTS ( CAR 503 +CAR 507)
This kit represents a MZ system and consists of two elements:
- kit of 22 MZ towers, universal CAR 503 – ( see pict.6 )
- kit of specific supports CAR 507
( pict. 6 )
( pict. 5)
Each MZ tower has an arrow, which settles
its orientation on the cross bar and a MZ
reference (pict.7)
Example – MZ 080, where:
MZ- measurement on OZ axle of the
vehicle.
080 – MZ tower height (in mm)
In the same way as for COMPACT
assembly, the arrow (1) marked on the specific
support must be oriented towards the bench
front part, as follows:
- attachment on the right part of the
mobile bench
- attachment on the left part of the
mobile bench
NOTE
The MZ towers may be used also for the checking/ straightening of the carriage
bodies of other vehicles types, being then necessary the purchasing of the specific supports
for each type of vehicle.
L
40
GENERAL
40 - 15
( pict.7 )
Each specific support is identified by
a number ( 2 ) marked at the lower part
and has one or two attachments holes in
the MZ tower ( in this case you should
take into consideration the specific
diagram from the assembly drawing
supplied together with the kit.
Symbols:
1 – wit h or without dism ounted
mechanical elements.
4 – with dismounted mechanical
elements.
NOTE :
Identification and mounting of the
towers on different modular cross bars
and of the specific supports in the MZ
towers (1…20), when repairing a Dacia
SupeRNova body, is to be performed as
per mounting drawing ( pict.8 and pict.9)
which is supplied together with this kit.
CARRIAGE BODY CHECKING / STRENGTHENING
BENCH CELETTE TYPE
( pict.8 )
( pict.9 )
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст