Dacia SuperNova (engine E7J). Service manual — part 109
71
INTRENAL BODY TRIM
72 - 11
CARPETS
DISMOUNTING
Remove :
- the complete trunk carpet (1);
- the rear carpet (2) after dismounting
the left/right rear coverings;
- the front carpet (3) after the
dismounting of the left/right door thresholds
coverings.
REMOUNTING
Perform in the reverse order the
dismounting operations.
71
INTRENAL BODY TRIM
72 - 12
DISMOUNTING
Detach the attachment clips (1) of the noise
absorbent pad (2) on the cowl panel.
Release the noise absorbent pad.
REMOUNTING
Perform in the reverse order the
dismounting operations.
COWL PANEL NOISE ABSORBENT
72
SIDE OPENINGS ELEMENTS TRIM
72-1
DISMOUNTING
Front door panel replacement is performed without the dismounting of the door, and the
operations that must be performed are the following:
Dismount the window regulator crank (2) that is mounted by clips attachment on the window
regulator axle.
Dismount the inner opening mechanism (3), by dismounting the screw (4) and detaching from
the inner opening mechanism, the front door opening control rod, this rod being fixed on the plate
with the other end.
Dismount the locking handle (8).
Dismount the screws (5) and remove the panel by clips detaching from the caisson of the door.
Dismount the guiding case (6) and the locking button. (7).
REMOUNTING
Perform in the reverse order the dismounting operations taking into account the following
recommendations:
- for the mounting of the inner opening mechanism, the opening control rod will be placed
in the position where the assembled plate with electric control is unblocked.
- after mounting, check the operation of the inner opening mechanism and its alignment
with the front door panel.
NOTE
The window regulator crank must be placed in horizontal position with the button
oriented toward front, the window being closed.
FRONT DOOR PANEL
72
SIDE OPENINGS ELEMENTS TRIM
72-2
DISMOUNTING
Rear door panel replacement is performed without the dismounting of the door, and the
following operations are to be performed :
Dismount the window regulator crank (2) that is mounted by clips attachment on the window
regulator axle.
Dismount the inner opening mechanism (3), by dismounting the screw (4) and detaching from
the inner opening mechanism, the rear door opening control rod, which is fixed on the plate with
the other end.
Dismount the locking handle (5).
Dismount the screws (6) remove the panel by detaching it from the caisson of the door.
Dismount the guiding case (8) and the locking button (7).
REMOUNTING
Perform in the reverse order the dismounting operations taking into account the following
recommendations:
- for the mounting of the outside opening mechanism, the opening control rod will be
placed in the position where the assembled plate with electric control is unblocked.
- after mounting, check the operation of the internal opening mechanism and its alignment
with the rear door panel.
NOTE
The window regulator crank must be placed in horizontal position with the button
oriented toward front, the window being closed.
REAR DOOR PANEL
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст