SsangYong Rodius (2013 year). Service manual — part 121
03-9
7010-06
ECU
Immobilizer Indicator and Warning Lamp
▶
This indicator comes on when the ignition
key is communicating with the engine control
unit (during engine starting) and goes out
after starting the engine.
When turning the ignition key to ON position, the
ECU transmits the challenge message to the
immobilizer unit to verify whether the key is valid.
(1)
Only when the two signals are identical, it
recognizes the key as the authorized one and
transmits the positive message to the ECU.
The ECU allows the engine to be started.
(6)
(7)
Do not drop or shock to the transponder in the key as it may be damaged.
With a damaged transponder, the engine cannot be started.
When you erase the code or register an extra key, let the owner attend on the site.
In any case, the immobilizer system cannot be removed from the vehicle. If you attempt to
remove it and damage the system, starting will be impossible, so never attempt to remove,
damage or modify it.
The remote engine starter cannot be installed on the vehicle equipped with the immobilizer
system.
-
-
-
-
-
Lamp ON: in communication
Blinking twice for one second:
immobilizer system failure
Blinking once for two seconds:
immobilizer unit is not coded
The immobilizer indicator does not come
on if the communication time between
immobilizer key and ECU is too short.
Immobilizer Indicator and Warning Lamp
03-10
2) Circuit Diagram
04-3
8010-01
1. SPECIFICATIONS
1) Power, Voltage, Current
Description
Specification
Rated voltage
DC 12V
Operating voltage
DC 9V ~ 16V
Inspection voltage
DC 13.5V
Operating temperature
Standard
-30˚C ~ +75˚C (while driving)
Black face
-30˚C ~ +80˚C
Storage temperature
-40˚C ~ +85˚C
Performance guarantee voltage
DC 10V ~ 15V
Dark current
Standard
below 3mA (12V, 25°C), Stabilized conditions (standby
mode) around 180 seconds after IGN OFF
Black face
below 1mA (12V, 25°C), Stabilized conditions (standby
mode) around 180 seconds after IGN OFF
04-4
2) LCD Display
Description
Specification
Color of display
Black
Color of back-light
Yellow/Green
Running type
1/4 Duty, 1/3 Bias
(1) Standard
(2) Black face
Description
Specification
LCD display type
Speedometer (segment)
LCD display
Specification
Selective display
TRIP A
TRIP B
Driving time
Average speed
Average fuel economy
Distance to empty
Illumination control
Constant display
Odometer
Instant fuel economy
Gear selector lever position
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст