SsangYong Rodius (2013 year). Service manual — part 37
01-3
0000-00
Left view
Right view
Rear view
Front view
1. ENGINE LAYOUT
01-4
2. MAJOR COMPONENTS
Front view
▶
Vacuum pump
Camshaft position sensor
Oil filter assembly
Power steering pump pulley
Oil pressure switch
Water pump pulley
Idler pulley No. 22
Alternator pulley
Auto tensioner
Idler pulley No. 1
A/C compressor pulley
Rear view
▶
E-EGR valve
Fuel temperature sensor
Fuel HP pump assembly
Coolant temperature sensor
Crankshaft position sensor
IMV valve
Isolation damper
01-5
0000-00
Right view
▶
Front exhaust gas temperature
sensor
Oil dipstick tube &
gauge assembly
E-VGT actuator
E-VGT turbocharger
Coolant screw plug
Oil drain plug
Left view
▶
Thermostat assembly
Variable swirl valve assembly
EGR cooler
E-EGR valve
E-EGR solenoid valve
Oil cooler assembly
Electronic throttle body
01-6
3. ENGINE COMPARTMENT LAYOUT
Do not work on the engine compartment while the engine, radiator, exhaust manifold, muffler or
catalytic converter is hot. Always turn the engine off and allow it to cool before starting the
maintenance.
Regularly check the engine oil level and add Ssangyong genuine engine oil if necessary.
Clean the dipstick with clean cloth so that any foreign materials cannot get into the engine.
-
-
-
Power steering fluid
reservoir
Brake fluid reservoir
Engine oil dipstick
gauge
Washer fluid
reservoir cap
Engine oil filler cap
Air cleaner
Operating vehicle with insuffi cient amount of oil can damage the engine. Make sure the engine
oil level is correct and add oil if necessary.
Coolant reservoir
Fuse & relay
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст