SsangYong Korando III (2010 year). Service manual — part 182

06-15

8510-00

The outside mirror folding switch is self return type and the aiming switch is seesaw and self return type.

Do not fold or unfold the outside rearview mirrors manually. It may cause a malfunction of the mirror

folding system.

Setting

1.

Set auto folding function: When pressing the mirror folding switch for over 3 seconds, the auto folding

function is set and the internal buzzer sounds once (ON: 0.1 sec, OFF: 0.2 sec).

Release auto folding function: When pressing the mirror folding switch for over 3 seconds, the auto

folding function is set and the internal buzzer sounds twice (ON: 0.1 sec, OFF: 0.2 sec).

-

-

Auto folding:

2.

When receiving the LOCK signal from the REKES, the system operates in the sequence of "Door lock
→ Theft deterrent mode activation → Mirror folding" for BCM without SKM.

When receiving the outside door handle switch signal or door lock signal from the smart key remote
control, the system operates in the sequence of Door lock → Theft deterrent mode activation →

Mirror folding" for BCM with SKM.

-

-

Auto unfolding sequence

When receiving the UNLOCK signal from the REKES, the system operates in the sequence of "Door
unlock → Theft deterrent mode deactivation → Mirror unfolding" for BCM without SKM.

When receiving the outside door handle switch signal or door unlock signal from the smart key remote
control, the system operates in the sequence of Door unlock → Theft deterrent mode
deactivation → Mirror unfolding" for BCM with SKM.

When the auto folding function is set, the automatic unfolding is not available if the mirrors have been

folded manually.

(The outside rearview mirror will be folded automatically if the auto folding function is set.)

The factory setting is the enabling the auto folding function.

3.

4.

5.

Auto folding/unfolding control

▶

06-16

Operation curve

▶

Folding/unfolding control

▶

When pressing the mirror folding/unfolding switch with IGN ON, the mirrors are folded or unfolded

according to the mirror condition. If the outside rearview mirror was folded, the mirror should be
unfolded, and vice versa. Folding/unfolding output is activated for 16±6 seconds.

This operation time should be completed even when the ignition switch is turned to OFF position

during its operation.

At first time pressing the mirror folding/unfolding switch after reconnecting the battery, the mirror

folding operation is performed.

You can control the mirror position within the first 30 sec. after turning the ignition OFF. In other

words, this control must be available for 30 seconds (time lag period) after turning the ignition switch

to OFF position. Folding/unfolding is completed when time lag of 30 seconds elapse during

operation.

When receiving the folding/unfolding signal during the mirror folding/unfolding operation, the output

should be activated after having time lag of 0.1 second.

The folding/unfolding operation is performed regardless of the vehicle speed.

Manual operation
- Mirror unfolded → Mirror folding/unfolding signal from switch → Mirror folding
- Mirror folded → Mirror folding/unfolding signal from switch → Mirror unfolding

1.

2.

3.

4.

5.

06-17

8510-00

2) Passenger Door Switches

Passenger side door trim switch

The window is up and down while this switch is operated manually.

Power window sub switch

06-18

Rear door switch (LH)

Rear door switch (RH)

3) Rear Door Switches

Warmer switch

Power window switch

The window is up and down while this switch is pressed.

Press the switch to heat the seat and press again to stop the seat heating. During

heating, the indicator light on the switch comes on.