SsangYong Korando III (2010 year). Service manual — part 440
03-44
Ignition key reminder operation
▶
The door LOCK switch is in LOCK position after the driver door is opened with the ignition key
inserted.
The UNLOCK signal is output for 0.5 seconds (T2) immediately after the LOCK signal output.
A.
B.
Operation 1.
The door LOCK switch is in LOCK position within 0.5 seconds (T1) after the door is closed with the
ignition key inserted.
The UNLOCK signal is output for 0.5 seconds (T2) immediately after the LOCK signal output.
C.
D.
Operation 2.
The door LOCK switch is in LOCK position after the driver door is opened with the ignition key
inserted.
The door UNLOCK signal is not output when the ignition key is removed during the door LOCK
output.
E.
F.
Operation 3.
Operating process
03-45
8710-01
The door LOCK/UNLOCK relay is installed inside the actuator.
03-46
All doors LOCK prevention function
▶
When the LOCK signal is input with the doors (driver/passenger/rear) open and the ignition key
removed or IGN ON).
The UNLOCK signal is output for 0.5 seconds (T1) immediately after the LOCK signal output.
A.
B.
Operation 1.
All doors are closed during the UNLOCK output.
The UNLOCK output continues.
C.
D.
Operation 2.
When the ignition key is inserted, the ignition key reminder is operated.
E.
Operation 3.
Except tailgate and hood
-
Operating process
This function does not work if the vehicle speed is over 10 km/h.
03-47
8710-01
The door LOCK/UNLOCK relay is installed inside the actuator.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст