SsangYong Korando III (2010 year). Service manual — part 260
03-5
7410-00
Rear center seat belt
Previous
Current
2-point type
3-point type
4. MAJOR CHANGES
1) Rear Center Seat Belt
2) Front Seat Back Board
Front seat back board
Previous
Current
Hook: Installed
Pocket: Net type
Hook: Not installed
Pocket: Fabric seat - Net type
Leather seat - Band type
03-6
3) Front Buckle
Front buckle
Previous
Current
Pad is attached to buckle
No pad is attached to buckle
Front buckle
Driver's
04-3
7340-00
1. SPECIFICATIONS
2. CAUTIONS WHEN WORKING
Wear clean work clothes and gloves.
Replace and wash the gloves frequently.
Any unauthorized modification or operational test is not allowed since the sunroof motor and control
unit are preset at the factory.
You can use basic tools, e.g. a 25T/10T star screwdriver, flat-bladed and cross-tip screwdrivers. Do
not use any similar tool.
Take care not to drop the sunroof assembly when removing it and do not keep it right up.
1.
2.
3.
4.
5.
Operating voltage
9 to 16 V
Operating current (open & close)
Max. 6 A
At no load
Approx. 3 A
Leakage current
Max. 1 mA or less
Roof motor operating speed
(at opening and closing)
1.4 ± 0.5 sec./100 mm
Motor overload stop conditions
Current for 25 A or higher and torque (load) for 7.5 Nm
or higher
2-step opening amount
1st step sliding open: 370 ± 5 mm
2nd step sliding open: 450 ± 5 mm
Vertical/horizontal tolerance for
sunroof glass panel
± 2 mm
04-4
Sunroof switch
1. SYSTEM LAYOUT
Sunroof assembly
TILT
OPEN
Sunroof motor &
control unit
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст