SsangYong Korando III (2010 year). Service manual — part 528
02-28
(9) Neutral / Park
Power flow
▶
03-3
3660-01
1. ABBREVIATION
No
Abbreviation
Name
1
DTC
Diagnostic trouble code
2
TCU
Transmission control unit
3
ATF
Automatic transmission fluid
4
DC
Damper clutch
5
PCSV
Pressure control solenoid valve
6
UD
Under drive
7
OD
Over drive
8
LR
Low reverse
9
LP
Line pressure
10
SOL
Solenoid
11
VFS
Variable force solenoid
12
PG-A
Input speed sensor
13
PG-B
Output speed sensor
03-4
2. GENERAL INFORMATION
Automatic transaxle (6F24)
▶
The Model 6F24 six speed automatic transaxle is
available in two variants: four wheel drive and two
wheel drive.
Six forward speeds
One reverse gear
A toruqe converter with an integral converter lock-
up clutch with slip control capabilities
Planetary gear-set (3EA)
Clutches (2EA)
Brake (3EA)
O.W.C (1EA)
All hydraulic functions are directed by electronic
solenoids to control:
-
-
-
-
-
-
-
-
Engagement feel
Shift feel
Shift scheduling
Modulated torque converter clutch
applications
1)
2)
3)
4)
Inhibitor switch
Oil pan
Torque converter
TCU (located under driver's seat)
▶
TCU is located under the driver's seat and controls
the transaxle operations.
TCU receives and uses the signals from sensors
and switches through CAN bus with analog and
digital types.
E-coupling unit
TCU
03-5
3660-01
The shiftable gear can be adjusted by pressing the
"UP (D+)" or "DOWN(D-)" switch when the gear
selector lever is in “M” position.
Shift lock release button
If the selector lever cannot be moved from
“P” or “N” position, try to move the lever
while pushing down this button with finger. For
safety, turn off the engine and depress the
brake pedal before the attempt.
Shift up
Shift down
Tip switches on steering wheel
▶
Meter cluster
▶
This indicator shows the current position of
the gear.
Gear selector lever
▶
Lever positions
P : Park
R : reverse
N : Neutral
D : Drive
Tip switch (manual shift switch)
The shiftable gear can be adjusted by
moving this switch to forward and rearward
when the gear selector lever is in “M”
position.
Selection of Manual/Automatic Shift Function
D: Automatic shift according to the driving condition
M: Manual shift
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст