SsangYong Korando III (2010 year). Service manual — part 60
10-14
When there is no engine cranking signal after turning the ignition key ON
▶
11-3
1461-00
1. SPECIFICATION
Capacity
12V 2.3kW
Engagement
Meshed type
Rotating direction
Clockwise
Pinion gear manufacturing
Cooled forging
Solenoid operating voltage
Max. 8 V
Weight
2.5 kg
Bracket manufacturing
Aluminum die casting
11-4
2. TROUBLESHOOTING
Problem
Possible Cause
Action
Engine will not crank
Low battery voltage
Charge or replace
Loose, corroded or damaged battery cable
Repair or replace
Faulty starter or open circuit
Faulty ignition switch or blown fuse
Repair or replace
Poor engine ground
Repair
Engine cranks too
slow
Low battery voltage
Charge or replace
Loose, corroded or damaged battery cable
Repair or replace
Faulty starter
Starter does not
stop
Faulty starter
Faulty ignition switch
Replace
Engine cranks
normally, but does
not start
Broken pinion gear or faulty starter
Replace the starter
Broken flywheel ring gear
Replace
Open circuit
Repair
11-5
1461-00
Start motor assembly
1. SYSTEM DESCRIPTION
The starter (start motor) starts the engine with rotational power by converting the electric energy to the
mechanical energy.
When the engine is cranking, the pinion gear meshes with the ring gear. If the ring gear overruns, the
pinion gear clutch overruns to protect the pinion gear.
System Configuration
▶
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст