SsangYong Korando III (2010 year). Service manual — part 322
02-10
02-11
0000-00
02-12
02-13
0000-00
4. CHECK AND INSPECTION
1) Cylinder
(1) Compression pressure test
Specified value
▶
Compression ratio
16.5 : 1
Test condition
at normal operating temperature (80˚C)
Compression pressure
Standard
32 bar
Minimum
18 bar
Differential limit between cylinders
Maximum 3 bar
The compression pressure test is to check the conditions of internal components (piston, piston ring,
intake and exhaust vale, cylinder head gasket). This test provides current engine operating status.
Before cranking the engine, make sure that the test wiring, tools and persons are keeping away from
moving components of engine (e.g., belt and cooling fan).
Park the vehicle on the level ground and apply the parking brake.
Do not allow anybody to be in front of the vehicle.
-
-
-
(2) Cylinder pressure leakage test
If the measured value of the compression pressure test is not within the specifications, perform the
cylinder pressure leakage test.
Specified value
▶
Perform this test in the sequence of firing order.
Do not test the cylinder pressure leakage with wet type test procedure. (do not
inject the engine oil into the combustion chamber)
-
-
Test condition: normal engine operating
temperature (80˚C)
Specified value
Whole engine
below 25%
at valve and cylinder head gasket
below 10%
at piston ring
below 20%
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст