SsangYong Korando III (2010 year). Service manual — part 338
05-4
2. CAUTIONS
Do not park the vehicle on flammable materials, such as grass, leaves and carpet.
Do not touch the catalyst or the exhaust gas ignition system when the engine is running.
If a misfire occurs in the combustion chamber or the emission of pollutant exceeds the specified
level, the catalyst can be damaged.
When servicing or replacing components of the exhaust system, makes sure that the components
are positioned at regular intervals from all other parts of the under body.
Be careful not to damage the exhaust system when lifting the vehicle from its side.
All components and body parts of the engine exhaust system should be inspected for crack,
damage, air hole, part loss and incorrect mounting location. Also check for any deformation which
can result in exhaust gas drawn into the vehicle.
Make sure that the exhaust pipe is cooled down sufficiently before working on it because it is still hot
right after the engine is stopped.
Wear protective gloves when removing the exhaust pipe.
-
-
-
-
-
-
-
-
05-5
0000-00
Exhaust manifold
CDPF assembly
No. 1 exhaust pipe
No. 2 exhaust pipe
No.3 muffler pipe
1. OVERVIEW
This system purifies the exhaust gas generated by the combustion in the engine to reduce the pollutants
and noise during that arise during combustion.
2. COMPONENT
Fore details about the CDPF
assembly, refer to Chapter
"CDPF System".
05-6
3. OPERATING PROCESS
1) Exhaust Gas Flow
2) Input & Output Devices
06-3
0000-00
1. SPECIFICATION
Component
Item
Specification
Turbocharger
Max. expansion coefficient
5.0
Max. turbine speed
215,000 rpm
Max. temperature of turbine housing
800 ℃
Weight
7.2 kg
E-Actuator
Operation duty cycle
300 Hz
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст