SsangYong Stavic / SsangYong Rodius (2005 year). Service manual — part 314
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
76
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
Left Section
Right Section
1. Valve housing
2. Selector valve
3. 2-3 overlap control valve
4. Lubricating pressure control valve
5. Operating pressure control valve
6. 3-4 holding pressure shift valve
1. Shift housing
2. 1-2/4-5 command valve
3. 1-2/4-5 holding pressure shift valve
4. 1-2/4-5 shift pressure shift valve
5. 1-2/4-5 overlap control valve
6. Shift pressure control valve
7. Regulating pressure control valve
8. Shift valve pressure control valve
9. Torque converter lockup clutch control valve
10. 2-3 shift pressure shift valve
11. 2-3 command valve
12. 2-3 holding pressure shift valve
13. Shift valve B2
7. 3-4 command valve
8. 3-4 shift pressure shift valve
9. 3-4 overlap control valve
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
77
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
1. Bolts (29)
2. Valve housing
3. Sealing plate
4. Shift housing
5. Leaf spring
1. Remove the leaf spring (5).
2. Remove the bolt (1).
Installation Notice
3. Remove the shift housing (4) from valve housing (2).
4. Remove the sealing plate (3).
5. Unscrew the bolts from shift housing and valve housing
and remove the side cover.
Installation Notice
6. Install in the reverse order of removal.
[Notice]
Before installation, make sure to insert the dowel pin into
correct position.
[Notice]
Be careful not to lose 4 plastic balls and 8 steel balls in shift
housing.
[Notice]
Check the valves for damage, and replace if necessary.
Disassembly and Reassembly
Tightening torque
8 Nm
Tightening torque
14 Nm
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
78
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
4WD
2WD
REMOVAL AND INSTALLATION (DC 5-SPEED A/T)
COMPONENTS
4WD
1. Torque converter housing
2. Plug connector
3. Oil line
4. Shield
5. Bolts
6. Transfer case adapter housing
7. Union plugs
8. Drain plug
9. Torque converter bolts
10. Oil line
2WD
1. Oil filler pipe
2. Drain plug
3. Union bolt
4. Shield
5. Plug connector
6. Torque converter bolts
7. Transmission assembly
8. Shift rod
9. Oil line
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
79
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
REMOVAL AND INSTALLATION
Transmission Assembly
Preceding Work: 1) Disconnect battery negative cable
2) Make sure the vehicle stand stable with safty wedge under tires
3) Put the shifting lever in “N”
4) Remove skid plate
*
Check point
Make sure that the oil cooler pipe hose is not twisted, oil cooler pipe (radiator side) is not clogged. If it is contami-
nated with foreign materials, thoroughly clean before replacing transmission assembly (This work is necessary
when removing and installing the radiator).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст