SsangYong Stavic / SsangYong Rodius (2005 year). Service manual — part 217
4
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
CLUSTER / WARNING & INDICATOR PANEL
STAVIC - 2004.09
2B
2. CONNECTORS AND CIRCUIT DIAGRAM
A
B
F
E
D
C
Gauge Panel
Indicator Display
5
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
CLUSTER / WARNING & INDICATOR PANEL
STAVIC - 2004.09
2B
Circuit Diagram of Indicator Display
6
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
CLUSTER / WARNING & INDICATOR PANEL
STAVIC - 2004.09
2B
3. DESCRIPTIONS OF INDICATOR DISPLAY
1. Immobilizer indicator
2. Glow indicator
3. Winter mode indicator
4. Left turn signal indicator and hazard flasher
5. Auto shift indicator (for automatic transmission)
6. Right turn signal indicator and hazard flasher
7. 4WD CHECK warning light
8. 4WD LOW indicator
9. Engine check warning light
10. Brake warning light
11. Battery charge warning light
12. Seat belt reminder
13. Low fuel level warning light
14. Defogger indicator
15. Door open warning light
16. High beam indicator
17. Engine oil pressure warning light
18. Air bag warning light
19. Water separator warning light
20. ABS warning light
21. EBD warning light
22. ESP warning light
Connector A
Connector B
Illumination lamp (bulb)
7
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
CLUSTER / WARNING & INDICATOR PANEL
STAVIC - 2004.09
2B
If the tachometer pointer vibrates, stands at a certain range or sounds abnormal noise, there could be defectives in
tachometer. If there is a difference between actual engine speed (rpm) and reading from tachometer, connect a scanner
and then compare the value on tachometer with the reading from scanner.
Description
Engine speed (rpm)
Tolerance (rpm)
6000
-
Specification (VIN=13 ± 0.1V, Temperature: 25
°C)
700
+50
-100
1000
+100
-100
2000
+125
-125
3000
+150
-150
4000
+150
-150
5000
-
The tachometer indicates engine speed in revolutions per minute. Multiply 1,000 to the current number, then it will be the
current number of engine revolutions.
Under the normal engine operating temperature, the proper idling speed is 700~800 rpm. The red zone (danger rpm
range) starts from 4,500 rpm.
1. Connect the tachometer for tune-up test and start the engine.
2. Eliminate the hysteresis by tapping the tachometer.
3. Compare the values on the tester and tachometer and replace the tachometer if the tolerance is excessive.
4. FUNCTION DESCRIPTION AND INSPECTION OF METER CLUSTER
Meter Cluster
Tachometer – Engine RPM Display
Danger range (red zone)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст