SsangYong Stavic / SsangYong Rodius (2005 year). Service manual — part 404
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
35
BRAKE - GENERAL
STAVIC - 2004.09
4J
4. Remove pedal assembly mounting bolts (12 mm) & nuts (12 mm).
Tightening torque
10 ~ 14 Nm
Bolt
Nut
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
36
BRAKE - GENERAL
STAVIC - 2004.09
4J
1. Remove the equalizer adjustment bolt (1).
2. Unscrew the mounting bolt (2) in equalizer lever and disconnect front brake cable (3).
3. Disassemble equalizer lever (4) from frame floor mounting.
4. Disconnect rear brake cable (5) and disassemble the equalizer.
Adjustment
1. Park the vehicle on the car lift and set blocks under front
tires.
2. Place the shift lever to “N” (A/T) or “Neutral” (M/T).
3. Release the parking brake.
4. Lift the rear wheels with supplementary lift.
5. Check the brake force as rotating the wheels - specified
hand brake notch : 5
6. If the brake force is not made enough, adjust the parking
brake adjust nut in the brake drum.
Equalizer Assembly
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
37
BRAKE - GENERAL
STAVIC - 2004.09
4J
Components
Removal and Installation
1. Remove shoe holding spring (2 EA) with plier.
2. Remove upper return spring & adjust bolt.
Adjusting bolt
Operating lever
Return spring - lower
Shoe holding spring
Return spring - upper
Parking Brake Shoe
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
38
BRAKE - GENERAL
STAVIC - 2004.09
4J
1. Have the brake shoe contact the inner face of brake disk by winding the brake adjust bolt using a tool (screw
driver), and then, unscrew the bolt by 4 ~ 5 notch. (Clearance between brake disk and brake shoe : 0.2 mm)
2. Check if the wheel become locked when brake force is applied.
Adjustment
3. Remove lower return spring and disassemble sperating lever from brake cable.
4. Install in the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст