SsangYong Stavic / SsangYong Rodius (2005 year). Service manual — part 302
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
22
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
PLANETARY GEAR SET
Relatively high step-down ratio
Ring gear locked
Sun gear driving (clockwise)
Planet gears driven (rotating counterclockwise)
Planet carrier driven (revolving clockwise)
Relatively low step-down ratio
Sun gear locked
Ring gear driving (clockwise)
Planet gears driven (rotating clockwise)
Planet carrier driven (revolving clockwise)
Direction reversal and step-down ratio
Planet carrier locked
Sun gear driving (clockwise)
Planet gears driven (counterclockwise)
Ring gear driven (counterclockwise)
Gear ratio: teeth of sun gear / teeth of ring gear
Relatively high
step-down ratio
Relatively low
step-down ratio
Direction reversal and
step-down ratio
Output
Locked
Locked
Output
Output
Input
Ring gear
Pinion gear
Sun gear
Planetary gear carrier
Input
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
23
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
MULTIPLE-DISC CLUTCH
Location
Three multiple-disc clutches, the front, middle and rear multiple-disc clutches K1, K2 and K3, are located in the plan-
etary gear sets in the transmission housing.
Funtion and description
A multiple-disc clutch consists of a number of internally toothed discs (10) on an internally toothed disc carrier and
externally toothed discs (9) on an externally toothed disc carrier.
If the piston (C1a) on multiple-disc clutch K1 is subjected to oil pressure, it presses the internal and external discs of the
disc set together. The sun gear (V1) is locked with the planet carrier (V3) via the externally toothed disc carrier (C1b) and
the internally toothed disc carrier (C1c). The front planetary gear set is thus locked and turns as a closed unit. If the
multiple-disc clutch C2 is actuated via the piston (C2a), the piston compresses the disc set. The ring gear (V4) of the
front planetary gear set is locked with the ring gear (M4) of the middle planetary gear set via the externally toothed disc
carrier (K2b) and the middle planet carrier (M3) on which the internally toothed discs are seated. Ring gear (V4) and ring
gear (M4) turn at the same speed as the input shaft (1). If the multiple-disc clutch C3 is actuated via the piston (C3a), the
piston compresses the disc set. The sun gear (M1) of the middle planetary gear set is locked with the sun gear (H1) of
the rear planetary gear set via the externally toothed disc carrier (C3b) and the internally toothed disc carrier (C3c). Sun
gear (M1) and sun gear (H1) turn at the same speed.
1. Input shaft
9. Externally toothed disc
10. Internally toothed disc
H1. Rear sun gear
C1a. Piston C1
C1b. Externally toothed disc carrier C1
C1c. Internally toothed disc carrier C1
C2a. Piston C2
C2b. Externally toothed disc carrier C2
C3a. Piston C3
C3b. Externally toothed disc carrier C3
C3c. Internally toothed disc carrier C3
M1. Middle sun gear
M3. Middle planet carrier
M4. Middle ring gear
V1. Front sun gear
V3. Front planet carrier
V4. Front ring gear
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
24
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
FREEWHEEL
Location
Freewheels are installed in the front planetary gear set between the sun gear and the stator shaft, and in the rear
planetary gear set between the sun gear and the intermediate shaft.
Function and description
The freewheel consists of an outer race (1), an inner race (2), a number of locking elements (3) and a cage (4) for these
locking elements.
If the inner race (2) of the freewheel is locked and the outer race (1) turns in direction “A”, the locking elements (3) adopt
a diagonal position on account of their special contours, allowing the freewheel function.
The outer race (1) slides over the locking elements (3) with negligible friction. If the rotation of the outer race (1) changes
to direction “B”, the locking elements (3) stand up and lock the outer and inner races (1, 2) together.
1. Outer race
2. Inner race
3. Locking elements
4. Locking element cage
A. Rotation direction “A”
B. Rotation direction “B”
V1/H1. Front or rear sun gear
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
25
DC 5-SPEED AUTOMATIC TRANSMISSION
STAVIC - 2004.09
4A
SENSORS AND CONTROLS
Components
Valve body assembly
1. Cap
2. Socket bolt (M6 x 32)
3. Socket bolt (M6 x 30)
4. Leaf spring
9. 1-2/4-5 shift solenoid valve
10. 3-4 shift solenoid valve
11. Electronic control module
12. Lockup clutch control solenoid valve
5. Lockup PWM solenoid valve
6. 2-3 shift solenoid valve
7. Shift pressure (SP) solenoid valve
8. Modulating pressure (MP) solenoid valve
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст