SsangYong Stavic / SsangYong Rodius (2005 year). Service manual — part 214
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ELECTRICAL SYSTEM
RODIUS /STAVIC- 2005.07
22
2A
4) Seat warmer relay (front seats) / Back sonar
Each seat warmer installed in the front seats has its own relay in ICM box.
When pressing the seat warmer switch prepared for each front seat, the seat cushion and seatback get warm. The
thermistor in the seat maintains the warming temperature at around 45°C by cutting off or connecting the power to
the heated wire.
Parking Aid Sensors on Rear Bumper
In the parking aid system equipped vehicle, its control unit is installed inside of the rear quarter trim behind the driver’s
seat. The buzzer for the back sonar is installed in ICM box. For more details, refer to “Parking Aid System” section in
this manual.
Back sonar
buzzer
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ELECTRICAL SYSTEM
RODIUS /STAVIC - 2005.07
23
2A
3. Unscrew the nuts and remove the ICM box.
Removal and Installation of ICM Box
1. Disconnect the negative battery cable.
2. Unscrew the screws from driver side instrument panel
undercover and remove the undercover.
4. Unscrew the connector mounting nuts from the back of the ICM box and disconnect the connector A and B.
5. Install in the reverse order of removal.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ELECTRICAL SYSTEM
RODIUS /STAVIC- 2005.07
24
2A
Wiring Harness, Connector & Ground Location
1) W/H Engine room
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ELECTRICAL SYSTEM
RODIUS /STAVIC - 2005.07
25
2A
2) W/H Main
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст