SsangYong Stavic / SsangYong Rodius (2005 year). Service manual — part 286
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
AIR CONDITIONING SYSTEM
STAVIC - 2004.09
43
3A
Tightening torque: 10 ~ 15 Nm
3) Air Conditioner Module Assembly
Front air conditioner module
* Preceding works: 1. Disconnection of negative battery cable and removal of instrument panel
2. Collection of air conditioner refrigerant (dispose the wasted refrigerant to designated place)
1. Disconnect the heater hose and remove the high and low pressure pipes from the air conditioner. (in case of FFH
equipped vehicle, remove the FFH assembly.)
2. Disconnect the air conditioner module connector
, unscrew the mounting screws and remove the blower unit
assembly.
A
B
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
AIR CONDITIONING SYSTEM
STAVIC - 2004.09
44
3A
3. Disconnect the ground cable
, unscrew the mounting screws and remove the heater unit assembly.
4. Install in the reverse order of removal.
Heater pipe mounting nut
Ground cable (A) and mounting nut
(bottom)
Heater module mounting nuts (side)
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
AIR CONDITIONING SYSTEM
STAVIC - 2004.09
45
3A
Rear Air Conditioner Module
Preceding works: 1. Disconnection of negative battery cable and removal of rear quarter panel
2. Collection of air conditioner refrigerant (dispose the wasted refrigerant to designated place)
1. Remove the rear cooler duct
and heater duct
.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
AIR CONDITIONING SYSTEM
STAVIC - 2004.09
46
3A
2. Remove the rear air conditioner module assembly with the sequence as below:
1) Remove the heater hose/pipe
.
2) Remove the air conditioner high and low pressure pipes
.
3) Disconnect the connector
.
4) Remove the rear air conditioner module mounting screws
.
5) Unscrew the lower mounting screw and remove the rear air conditioner module assembly.
Tightening torque: 10 ~ 15 Nm
Heater/air conditioner pipe
Lower mounting screw
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст