SsangYong Stavic / SsangYong Rodius (2005 year). Service manual — part 237
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
SWITCH
STAVIC - 2004.09
4
2E
SWITCHES
1. CENTER SWITCH
Seat Warmer Switch
The seat warmer relay is installed in ICM box and the seat heated wire is installed in the driver’s and passenger’s seat.
When the seat warmer switch is operated, the seat cushion and seatback gets warm. If the temperature of seat surface
gets 40 ± 5°C, the thermistor cuts or connects the power to heated wire to maintain the temperature to the specified
level.
The is no control switch and unit to control the temperature of the seat surface temperature.
Driver’s seat warmer
switch
Passenger’s seat
warmer switch
Seat heated wire (driver’s and
passenger’s seat)
Seat heated wire (driver’s and passenger’s seat)
– in ICM box
Seat heated wire relay - LH
Seat heated wire relay - RH
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
SWITCH
STAVIC - 2004.09
5
2E
Rated capacity: DC 12V, 1A
Connector Terminals and Circuit
- Internal circuit diagram of seat warmer switch
Seat warmer relay
(in ICM box)
[Notice]
- Do not place anything sharp on the seat.
- When cleaning the seats, do not use organic solvents such as benzene or thinner.
- Do not use this function when the engine is not running. The battery could be discharged.
[Notice]
The temperature of seat surface should be increased over 20
°
C within 3 minutes after turning on the switch while a person
(height: 175 ± 5 cm, weight: 75 ± 5 kg).
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
SWITCH
STAVIC - 2004.09
6
2E
Fog lamp
Fog Lamp Switch
• The fog lamp with indicator comes on when pressing the fog lamp switch while the light switch is “ON”. It goes off
when pressing the switch again.
Connector Terminals and Circuit
Rated capacity: DC 12V, 1A
Fog lamp switch
Fog lamp connector
Fog lamp relay
Fog lamp relay
Engine compartment
fuse and relay box
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
SWITCH
STAVIC - 2004.09
7
2E
Hazard Warning Flasher Switch
The hazard warning flasher switch is connected to the turn signal lamp circuit. The hazard warning flasher unit is
integrated into the ICM box. If the flasher unit is defective, should replace the ICM box assembly.
• The hazard warning indicators on the indicator display, both turn signal lamps, and both side repeaters blink when
pressing the hazard warning flasher switch.
Connector Terminals and Circuit
Flasher unit (in ICM box)
Indicator lamp
Left side
lamps
Flasher unit
ICM box
Turn signal lamp
switch
Right side
lamps
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст