SsangYong Stavic / SsangYong Rodius (2005 year). Service manual — part 376
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
15
REAR SUSP & AXLE
STAVIC - 2004.09
4F
Removal and Installation
Compress the coil spring with special tool and then, disas-
semble the spring.
[Notice]
For easier removal, remove the spring seat first.
[Notice]
Pay attention to use special tool and coil spring.
Sudden release of coil spring could cause a serious accident.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
16
REAR SUSP & AXLE
STAVIC - 2004.09
4F
3) Thrust Link / Tension Link
Thrust Link
Tension Link
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
17
REAR SUSP & AXLE
STAVIC - 2004.09
4F
Removal and Installation
Thrust Link
1. Unscrew the thrust link mounting bolts (19 mm-2EA) and remore the link.
2. When install, apply two washers to the thrust link mounting bolt/nut (A. Wheel carrier)
B. Body
A. Wheel carrier
[Reference]
1. Keep the right position when reinstall (faced outward).
2. Apply the longer bolt to the thrust link wheel carrier side.
Tightening torque (A, B)
70 ± 8 Nm
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
18
REAR SUSP & AXLE
STAVIC - 2004.09
4F
Tension Link
1. Unscrew the tension link mounting bolt (B. Body-19 mm).
2. Unscrew the tension link mounting bolt (A. Wheel carrier-19 mm).
[Reference]
1. Keep the right position when reinstall.
2. Apply the longer bolt to the tension link wheel carrier side.
Tightening torque
Body: 70 ± 8
Wheel carrier: 70 ± 8
B. Body
A. Wheel carrier
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст