SsangYong Stavic / SsangYong Rodius (2005 year). Service manual — part 452
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY EXTERIOR
STAVIC - 2004.09
42
5B
3. LAYOUT - COWL ASSY / HOOD
Hinge
Cowl assembly
Cap
S c r e w
Screw cap
Peace
Hinge
Bumper
Hood seal
- rear
Hood insulator
Hood
Hood seal - Front
Hood seal - sub
Hood over slam
Hood latch handle
Braket
Cable
Key
Bolt
Hood latch
Nut
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY EXTERIOR
STAVIC - 2004.09
43
5B
Removal and Installation
Adjustment
1. Release the hinge bolts.
2. Have the hood mounted properly.
3. Adjust the height of hood with overslam bumper.
Preceding Work: Wrap the body with soft material to prevent from damage
1. Unscrew hood hinge bolts (8 mm - 4ea) and disassemble hood from thevehicle (A).
Hood
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY EXTERIOR
STAVIC - 2004.09
44
5B
3. Disassemble the hood cable.
Preceding Work: Removal of front bumper assem-
bly (Including head lamp)
1. Disconnect the hood cable from head latch handle.
2. Unscrew hood latch mounting bolts (6 mm - 4EA) and disconnect spring hood cable to disassemble hood latch.
Hood Latch, Cable
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY EXTERIOR
STAVIC - 2004.09
45
5B
3. Remove cowl mounting clip (6EA) and screw (4EA).
4. Disassemble left / right cowl grill (Left side first, disassemble washer hose before take the cowl out)
Left
Right
Cowl Grill
1. Disconnect washer hoses at both wiper.
2. Unscrew wiper mounting nuts (14mm - 2EA) and
Cowl Grill & Insulator
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст