SsangYong Stavic / SsangYong Rodius (2005 year). Service manual — part 200
DI10-195
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.9
1. When performing the static test for injector back leak Volume, the fuel pressure leakage test with SCAN-100
should be done simultaneously. And, the fuel pressure leakage test with SCAN-100 can be done separately.
2. Test Conditions:
• No defective or faulty sensors and components in fuel system: checked by Scan-i
• Coolant temperature: over 60°C
3. The diagnosis procedures with SCAN-100 are as below:
1) Install the SCAN-100 to the diagnostic connector. Select
“DIAGNOSTICS” and press “ENTER” in “MAIN MENU”
screen. Select “STAVIC” and press “ENTER” in “VEHICLE
SELECTION” screen.
2) Select “ECU” and press “ENTER” in “CONTROL UNIT
SELECTION” screen.
PRESSURE LEAKAGE TEST WITH SCAN-100
3) Select “LEAK DETECTION” and press “ENTER” in
“FUNCTION SELECTION” screen.
DI10-196
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.9
4) If there are not any troubled conditions in “TEST
CONDITION” screen, press “ENTER”.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ELECTRICAL SYSTEM
STAVIC - 2004.09
2
2A
ELECTRIC SYSTEM LAYOUT
1. LOCATIONS OF UNITS AND SENSORS IN PASSENGER COMPARTMENT
Amplifier/Tuner/Navigation unit and PAS unit
STICS
ICM
module
TV antenna
amplifier
Sensor cluster (ESP) Air bag unit (SDM)
PAS unit
Tuner
DSP integrated amplifier
Sun sensor
Navigation unit
Windshield
heated glass unit
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ELECTRICAL SYSTEM
STAVIC - 2004.09
3
2A
Interior temperature and
humidity sensor
Rain sensing unit and ECM
Sun roof unit and motor
AM/FM radio amplifier
TV antenna
amplifier
Steering wheel angular
sensor
Engine ECU
TCU and TCCU
TCCU
TCU
Auto light sensor
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст