SsangYong Stavic / SsangYong Rodius (2005 year). Service manual — part 275
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
LAMP
STAVIC - 2004.09
22
2I
1) Door Courtesy Lamp Assembly
Preceding work: Disconnection of negative battery cable
1. Remove the door courtesy lamp cover (1) from the door panel and pull out the bulb (2) with new one with same
specifications.
2) Glove Box Lamp Assembly
Preceding work: Disconnection of negative battery cable
1. Open the glove box cover and push down the front portion of the lamp. Disconnect the connect and remove the
lamp assembly.
2. Disconnect the lamp connector and remove the lamp. However, it is not necessary to disconnect the connector
when removing only the bulb.
3. Install in the reverse order of removal. Replace the bulb with new one with same specifications.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
LAMP
STAVIC - 2004.09
23
2I
3. Luggage Room Lamp Assembly
Preceding work: Disconnection of negative battery cable
1. Open the tailgate and remove the luggage room lamp cover with a flat blade screwdriver. At this time, be careful not
to damage the surroundings.
2. Remove the bulb from the luggage room lamp with new one with same specifications.
Bulb
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
LAMP
STAVIC - 2004.09
24
2I
4) Side Room Lamp Assembly
Preceding work: Disconnection of negative battery cable
1. Unscrew the screws and remove the side room lamp
assembly.
2. Disconnect the lamp connector (1), unscrew the screws from the removed room lamp assembly, and remove the
lamp.
* when removing the bulb
Remove the lamp cover (1) and pull out the bulb (2). Be careful not to damage the lamp cover when removing it.
[Notice]
1. Be careful not to damage the lamp cover when removing it.
2. Replace the bulb with new one with same specifications.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
LAMP
STAVIC - 2004.09
25
2I
4. Remove the bulb from the removed front room lamp. Install in the reverse order of removal.
5. Front Room Lamp Assembly
Preceding work: Disconnection of negative battery cable
Removal and Installation of Front
Room Lamp
1. Open the sunglasses box and remove two screws.
2. Remove the front room lamp assembly.
3. Disconnect the multi-meter connector (1) and bulb
connector (2).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст