SsangYong Stavic / SsangYong Rodius (2005 year). Service manual — part 445
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY EXTERIOR
STAVIC - 2004.09
14
5B
Front Door Trim
Preceding Work: Disassembly of battery terminal (-)
1. Remove five screw rivets at the lower door trim.
2. Remove armrest grip cover and two screws.
3. Remove door handle cover.
4. Remove one screw (Refer to arrow mark).
[Notice]
Disconnect door handle cover with slim tool(driver) from
down side first otherwise, the grip holder can be damaged.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY EXTERIOR
STAVIC - 2004.09
15
5B
8. Disassemble the front door trim.
5. After getting some space (1), disassemble door trim from the door panel as pushing up (2).
6. Remove door courtesy lamp connector & outside mirror connector at the inside of door trim.
7. Disconnect the power window switch.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY EXTERIOR
STAVIC - 2004.09
16
5B
Front Door Trim Seal
Preceding Work: Removal of door trim
1. Remove door handle screw (1) and disconnect door handle
cable.
2. Unscrew 4-screws of two brackets.
3. Be careful not to damage the seal.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
BODY EXTERIOR
STAVIC - 2004.09
17
5B
Window Regulator Assembly
Preceding Work: Removal of door trim
1. Unscrew two mounting bolts and disassemble door window
[Notice]
Be careful not to damage the body coating by window glass.
2. Be careful not to damage the body coating by window glass.
3. Disconnect door window regulator and motor mounting nuts (6 mm - 7 EA).
4. Disassemble window regulator assembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст