SsangYong Musso. Service manual — part 421
1F3-34 OM600 ENGINE CONTROLS
12. Push back the timing chain with retaining plate (26) and
remove the injection timing device (9).
Retaining Plate 667 589 04 63 00
13. Installation should follow the removal procedure in the
reverse order.
14. After assembling the engine, check start of delivery and
adjust if necessary.
OM600 ENGINE CONTROLS 1F3-35
INJECTION TIMING DEVICE
Preceding Work : Removal of injection timing device
1 Cam Sprocket . . . . . . . . . . ... Check
2 Bushing . . . . . . . . . . . . . Check
3 Governor Weights
4 Segment Flange and Drive Hub
5 Compression Springs
1F3-36 OM600 ENGINE CONTROLS
Disassembly & Assembly
1. Remove the governor weights (3).
2. Pull out the compression springs (5) and cam sprocket (1)
from the segment flange (4).
3. Knock out the bushing with a proper drift.
4. Installation should follow the removal procedure in the
reverse order.
OM600 ENGINE CONTROLS 1F3-37
START OF DELIVERY TEST (POSITION SENSOR, RIV METHOD)
1 Position Sensor
2 Battery
3 Fuel Injection Pump
4 Seal . . . . . . . . . . . . . ... Replace
5 Screw Plug . . . . . . . . . . . . . 30Nm
Service Data
Start of Delivery (RIV)
ATDC 14° - 16°
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст