SsangYong Korando II (1996-2006 year). Service manual — part 429
SSANGYONG MY2002
9D-6 WIPER, WASHER SYSTEMS
KAA9D080
KAA9D090
KAA9D100
WINDSHIELD WASHER PUMP
Removal and Installation Procedure
1. Remove the windshield washer reservoir. Refer to
in this section “windshield washer reservoir”.
2. Remove the windshield washer pump.
3. Installation should follow the removal procedure
in the reverse order.
WINDSHIELD WASHER HOSES
Removal and Installation Procedure
1. Open the hood.
2. Disconnect the windshield washer hose from the
washer nozzles on the hood.
3. Disconnect the washer hose from the washer
reservoir.
4. Remove the washer hose.
5. Installation should follow the removal procedure
in the reverse order.
KAA9D110
REAR WIPER ARM
Removal and Installation Procedure
1. Remove the spare tire with wheel nuts.
2. Pry off the rear wiper arm cap.
3. Remove the rear wiper arm with the nut.
Installation Notice
•
Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct
fasteners to prevent premature corrosion.
4. Installation should follow the removal procedure
in the reverse order.
WINDSHIELD WASHER NOZZLES
Removal and Installation Procedure
1. Open the hood.
2. Disconnect the washer hose from the nozzle.
3. Remove the nozzle from the hood.
4. Installation should follow the removal procedure
in the reverse order.
Tightening Torque
8 - 12 N•m
(71 - 106 lb-in)
WIPER, WASHER SYSTEMS 9D-7
SSANGYONG MY2002
KAA9D120
KAA9D130
REAR WIPER MOTOR
Removal and Installation Procedure
1. Remove the tailgate trim panel. Refer to Section
9G “INTERIOR TRIM”.
2. Remove the tailgate seal trim.
3. Remove the wiper motor.
Installation Notice
•
Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use
the correct fasteners to prevent premature
corrosion.
4. Installation should follow the removal procedure
in the reverse order.
Tightening Torque
8 - 12 N•m
(71 - 106 lb-in)
KAA9D140
REAR WASHER RESERVOIR
Removal and Installation Procedure
1. Remove the tailgate trim panel. Refer to Section
9G “INTERIOR TRIM”.
2. Remove the tailgate seal trim.
3. Disconnect the washer hose and electrical
connector.
4. Remove the rear washer reservoir.
Installation Notice
•
Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use
the correct fasteners to prevent premature
corrosion.
5. Installation should follow the removal procedure
in the reverse order.
Tightening Torque
8 - 12 N•m
(71 - 106 lb-in)
SSANGYONG MY2002
9D-8 WIPER, WASHER SYSTEMS
Rear Wiper Arm Nut
Windshield Washer Reservoir Mounting Bolts
Windshield Washer Reservoir Mounting Bolts (Front)
Wiper Motor Mounting Nuts (Front)
Wiper Motor Mounting Nut (Rear)
Application
N•m
14 - 18
8 -12
8 -12
8 -12
8 -12
10 - 13
10.5 - 15.8
10.5 - 15.8
10.5 - 15.8
10.5 - 15.8
-
126 - 190
126 - 190
126 - 190
126 - 190
Lb-Ft
Lb-In
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
WIPER, WASHER SYSTEMS 9D-9
SSANGYONG MY2002
SCHEMATIC AND ROUTING DIAGRAMS
WINDSHIELD WIRING SYSTEM
KAA9D150
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст