SsangYong: Engine Euro 4. Service manual — part 45
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
9
1491
DIAGNOSIS
D27DTP/D27DT (EU4) SM - 2006.08
D27DTP/D27DT (EU4)
ENGINE
FUEL
I
N
T
AKE
EXHAUST
PRE-HEA
TING
LUB
COOLING
SWITCHABLE
ECU
DIAGNOSIS
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
ڨڤڮڞڠڧڧڜکڠڪڰڮ
ڨڤڮڞڠڧڧڜکڠڪڰڮ
ڞڎڤ
ڞڎڤ
1. Select “4] TROUBLE CODE CLEAR” and press
on “FUNCTION SELECTION” screen.
2. The “DIAGNOSTIC TROUBLE CODES” screen is
displayed.
If you press
key, the trouble code is cleared.
But, the active trouble code (C) cannot be cleared.
Trouble Code Clearing
Ú
Ú
Ú
Ú
Ú Preceding Work: Perform the “Entering Diagnosis
Procedures”
3. When the procedure is completed, return to “1]
TROUBLE CODE” screen and check if the trouble
codes have been completely cleared. But, the active
trouble code (C) cannot be cleared.
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
10
1491
DIAGNOSIS
D27DTP/D27DT (EU4) SM - 2006.08
D27DTP/D27DT (EU4)
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
ڨڤڮڞڠڧڧڜکڠڪڰڮ
ڨڤڮڞڠڧڧڜکڠڪڰڮ
ڞڎڤ
ڞڎڤ
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
ڵڋڎڟڰڋڋڋڋڋڋڋڋڋڋڋڋ
ڵڋڎڟڰڋڋڋڋڋڋڋڋڋڋڋڋ
کڞڝڎړ
کڞڝڎړ
ڜڋڌ
ڜڋڌ
ڟڴګڥڎڍړڋڋڋڋڋڌ
ڟڴګڥڎڍړڋڋڋڋڋڌ
ٻٻٻٻٻڍڋڋڑڈڋڏڈڋڎ
ٻٻٻٻٻڍڋڋڑڈڋڏڈڋڎ
ڱڤکٻڲۍۄۏۀ
ڱڤکٻڲۍۄۏۀ
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
1. Select “5] ECU IDENTIFICATION” and press
on “FUNCTION SELECTION” screen.
2. The “ECU IDENTIFICATION” screen showing the VIN,
ECU software number, ECU software version and pro-
gramming date is displayed.
ECU Identification
Ú
Ú
Ú
Ú
Ú Preceding Work: Perform the “Entering Diagnosis
Procedures”
3. If you have replaced the ECU, press
to enter
the vehicle identification number.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
11
1491
DIAGNOSIS
D27DTP/D27DT (EU4) SM - 2006.08
D27DTP/D27DT (EU4)
ENGINE
FUEL
I
N
T
AKE
EXHAUST
PRE-HEA
TING
LUB
COOLING
SWITCHABLE
ECU
DIAGNOSIS
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
ڟگګٻڍڒڋڃڞڎڤڄ
2. The “INJECTOR (C2I or C3I) CODING” screen showing the current C2I or C3I coding values of #1 to #5 injector is
displayed. If necessary, press
key and enter the value.
Injector Coding (C2I/C3I)
Ú
Ú
Ú
Ú
Ú Preceding Work: Perform the “Entering Diagnosis
Procedures”
1. Select “6] INJECTOR (C2I) CODING” and press
on “FUNCTION SELECTION” screen.
C3I Label
D27DTP (POWER UP) Engine
D27DT Engine
3. If you have replaced the ECU, enter the C2I or C3I value for the relevant injector.
* Coding of D27DTP (POWER UP) Engine Injector:
C3I (20 digits)
* Coding of D27DT Engine Injector: C2I (16 digits:
samp with current version)
D27DT Engine: C2I Coding
D27DTP Engine: C3I Coding
C2I Label
• If the injector/ECU has been replaced or the injec-
tor system failure is suspected, go to C2I or C3I
Coding item and check the injector and coded in-
jector C2I or C3I value.
NOTICE
• The C2I value of injector is on
the label.
• C2I coding number: 16 digits
(ex, C0 2D 835. )
• C3I coding number: 20 digits
(ex, ZD87E03R. )
NOTE
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
12
1491
DIAGNOSIS
D27DTP/D27DT (EU4) SM - 2006.08
D27DTP/D27DT (EU4)
3-2. If you enter the invalid C2I or C3I value of the rel-
evant injector, the message as shown in figure ap-
pears with alarm sound.
3-1. If you press [ENTER] on C3I (C2I) display, the recoding menu of C3I or C2I appears.
C3I is coded by using alphabet letters up to Z. If you want to change a number in the coding letters, press the
number keypad of SCAN-100. If you press PgUp or PgDn key, you can enter alphabet letters again.
3-3. If you enter the valid C2I or C3I value of the relevant
injector, the message as shown in figure appears
with alarm sound.
• If you want to return to previous screen, press
key. You can see the previous C2I or C3I value.
NOTE
• When coding C2I or C3I, if you select the engine
out of the models, the injector coding items per-
taining to the engine appear.
NOTICE
• If you return to previous screen, press
key.
Then, the new C2I or C3I values are displayed.
NOTE
• The alphanumeric letters are from A ~ Z followed by 0 ~ 9.
NOTE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст