SsangYong: Engine Euro 4. Service manual — part 101
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
4
DIAGNOSIS
P/TRUNK
Causes
- The related wiring is damaged.
- The connector is poorly connected or damaged.
- The battery is defective.
Actions
- Check the related wiring for proper connection.
- Check the battery and replace it if necessary.
Power
Trunk
Monitoring
Causes
- The related wiring is damaged.
- The connector is poorly connected or damaged.
- The CAN communication is malfunctioning.
- The PTL ECU is malfunctioning.
Actions
- Check the related wiring for proper connection.
- Replace the PTL ECU.
Cause
- If the DC-gear motor is operated 7 times within 2 minutes, it is considered as misusage and
overheated DC-gear motor.
Action
- The system resumes its operation in 90 seconds.
Function
System component
DTC
Description
Battery
4
Low battery voltage
Causes
- The related wiring is damaged.
- The connector is poorly connected or damaged.
- The internal temperature sensor in the PTL ECU is malfunctioning.
- The PTL ECU is malfunctioning.
Actions
- Check the related wiring for proper connection.
- Replace the PTL ECU.
Causes
- The related wiring is damaged.
- The connector is poorly connected or damaged.
- The power trunk lamp is malfunctioning.
- The PTL ECU is malfunctioning.
Actions
- Check the related wiring for proper connection.
- Replace the power trunk lamp.
- Replace the PTL ECU.
CAN communication
5
Faulty CAN communication
Power trunk
6
Faulty usage
PTL ECU
7
Faulty temperature detection of unit
PTL ECU
8
Faulty temperature detection of unit
CCCS
CCCS DIAGNOSIS . . . . . . . . . . . . . . . . . . . . . . . 3
STICS Input/Output Monitoring Data . . . . . . . . . . . . . . . . ... 5
DIAGNOSIS OF MAIN DICS . . . . . . . . . . . . . . . . . . ... 10
Main DICS Input/Output Monitoring Data . . . . . . . . . . . . . . .. 11
DIAGNOSIS OF SUB DICS . . . . . . . . . . . . . . . . . . . . 17
Sub DICS Input/Output Data . . . . . . . . . . . . . . . . . . . . 18
DIAGNOSIS OF MS-DOS . . . . . . . . . . . . . . . . . . . ... 20
MSDOS Input/Output Data . . . . . . . . . . . . . . . . . . . . 22
DIAGNOSIS OF ESIMS . . . . . . . . . . . . . . . . . . . . .. 25
ESIMS Input/Output Data . . . . . . . . . . . . . . . . . . . . . 26
TABLE OF CONTENTS
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
3
DIAGNOSIS
CCCS
BRAKE
ECU
TCU
A/BAG
TC
RK-STICS
FFH
R/SENSOR
FA
T
C
TGS-LEVER
P/TRUNK
CCCS
CCCS DIAGNOSIS
Code
Malfunction
Help
- Check the driver side door actuator
- Check the sensor values
• Driver side door open switch (STICS sensor value: No. 5)
• Door lock switch (STICS sensor value: No. 21)
• Driver door lock switch (STICS sensor value: No. 37)
• Door lock switches other than the driver side door (STICS sensor value: No. 38)
• Door lock (DICS-Main: No. 30)
• Key lock (DICS-Main: No. 32)
- Check the driver side door wires and connectors
- Check the passenger side door actuator
- Check the sensor values
• Passenger side door open switch (STICS sensor value: No. 6)
• Door lock switch (STICS sensor value: No. 21)
• Door lock switches other than the driver side door (STICS sensor value: No. 38)
• Door lock (DICS-Sub: No. 3)
• Key lock (DICS-Sub: No. 5)
- Check the passenger side door wires and connectors
- When one of the two rear seat door knobs is defective
- Check the rear seat door actuator
- Check the sensor values
• Rear door knob switch (STICS sensor value: No. 7)
• Rear right door open switch (STICS sensor value: No. 8)
• Door lock switch (STICS sensor value: No. 21)
• Rear door open switch (STICS sensor value: No. 23)
• Door lock switches other than the driver side door (STICS sensor value: No. 38)
• Door lock switch (DICS-Main sensor value: No. 32)
• Key lock (DICS-Main sensor value: No. 32)
• Door lock (DICS-Sub sensor value: No. 3)
• Key lock (DICS-Sub sensor value: No. 5)
- Check the rear door wires and connectors
- Check the tail lamp relay connector
- Check the sensor values
• Tail lamp switch (STICS sensor value: No. 3)
• Tail lamp signal input status (STICS sensor value: No. 20)
• Tail lamp relay (STICS sensor value: No. 47)
- Check the tail lamp wires and connectors
- The defective code of signals coming from ABS/ESP which senses the
vehicle speed incorrectly due to the exterior noises
- Current vehicle speed (STICS sensor value: No. 58)
- Check the speed sensor connector
- Check the other units (ABS) that use speed signal
- Does not receive the vehicle speed signal from STICS when the ignition
switch is turned off
0 X 01
0 X 02
0 X 03
0 X 04
0 X 05
Driver door lock
knob does not lock
Passenger door
lock knob does not
lock
Rear door lock knob
does not lock
Defective tail lamp
auto off function
(Battery save
function)
Incorrect indication
of the vehicle speed
(Detects as over
300 km/h)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст