SsangYong: Engine Euro 4. Service manual — part 94
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
3
DIAGNOSIS
RK-STICS
BRAKE
ECU
TCU
A/BAG
TC
RK-STICS
FFH
R/SENSOR
FA
T
C
TGS-LEVER
P/TRUNK
CCCS
DIAGNOSIS TROUBLE CODE AND HELP TIPS
Dr Door Lock Knob
Ps Door Lock Knob
Rr Door Lock Knob
T/Gate Lock Knob
Door Lock Output
Door Unlock Output
C/DR Lock Output
DR Lock Output
PS Lock Output
Auto Door Lock Output
Auto Door Unlock Output
Wiper Output
SPEED SIGNAL
INT WIPER Volume
SPEED SENSOR
A/BAG COLLISION
SENSOR INPUT
A/BAG COLLISION
SENSOR OUTPUT
A/BAG COLLISION
MONITOR
Door Ajar Warning IND
PARKING BRAKE IND
Auto Washer Out
WASHER RELAY
Fault Code
Malfunction
Descriptions
Driver’s door lock knob is not operated when locking/unlocking doors.
Passenger’s door lock knob is not operated when locking/unlocking
doors.
Rear door lock knob is not operated when locking/unlocking doors.
Tailgate lock knob is not operated when locking/unlocking doors.
All door lock knob are not moved to lock position even when the door
lock relay is activated.
All door lock knob are not moved to unlock position even when the
door unlock relay is activated.
Doors are locked by central door lock switch while the engine is
running.
Doors are locked by driver’s door lock switch while the engine is running.
Doors are locked by passenger’s door lock switch while the engine is
running.
Door lock knob is not moved to lock position when the system out-
puts auto door lock signal while the ignition switch is in ON position
and the vehicle speed is over 50 km/h.
Door lock knob is not moved to unlock position after receiving the
output from collision sensor.
The WIPER P-POS signal is not detected when the wiper relay is
activated.
The vehicle speed over 3 km/h is detected at the speed signal area
while the ignition switch is in ON position and the alternator signal is
“D” LOW.
The circuit is open (over 4.5 V) when changing the INT volume in the
speed sensitive INT wiper (saved as history error).
The vehicle speed over 200 km/h is detected (saved as history error).
A signal is sent to the collision sensor input area while the ignition
switch is in OFF position (saved as history error unconditionally).
The RKSTICS outputs UNLOCK signal after receiving collision sensor
input while the ignition switch is in ON position (saved as history
error).
The STICS outputs the Door Unlock signal due to the collision sensor
and the feedback value is in proper range (saved as history error).
The door warning indicator blinks when the vehicle speed is over
10 km/h (saved as history error).
The parking brake indicator blinks when the vehicle speed is over
10 km/h (saved as history error).
The auto washer output is not sent to the front washer (saved as
history error).
The front washer switch receives the input signal for more than
10 seconds (saved as history error).
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
4
DIAGNOSIS
RK-STICS
REMOCON VOLTAGE
CHECK
SBR S/BELT SW
(Only EU)
SBR SENSOR (Only EU)
SBR CONNECTION
(Only EU)
Fault Code
Malfunction
Descriptions
The voltage from remote control key is saved as history error.
When the seat belt switch circuit is OPEN (HIGH) in KEY OUT &
ARMED MODE, the system recognizes it as FAIL and saves it as
History error (Normal Close (GND)).
When the sensor value is recognized in KEY OUT & ARMED MODE,
the system saves it as History error.
When the seat belt switch circuit maintains OPEN (HIGH) in KEY
OUT & ARMED MODE while the vehicle speed is over 50 km/h, the
system saves it as History error.
23
24
25
26
FFH
DIAGNOSIS . . . . . . . . . . . . . . . . . . . . . . . . . ... 3
TROUBLE DIAGNOSIS . . . . . . . . . . . . . . . . . . . . . ... 5
TABLE OF CONTENTS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст