SsangYong Rexton. Service manual — part 467
FRONT SUSPENSION 2C-17
SSANGYONG Y200
Installation Procedure
1. Compress the coil spring as the specified torque
and install the related components. And then
tighten the lock nut.
Installation Notice
YAD2C320
Length at compression
Tightening torque of
lock nut
334 N•m
25 - 40 N•m
(18 - 30 lb-ft)
Notice: Be careful to the installation direction for
installing the coil spring.
Note: When it’s difficult to tighten the nut as
specified torque, fix the length from upper lock
nut to bolt end to 23 ~ 24 mm.
YAD2C330
2. Check the coil spring installation.
•
Check the installation direction of the coil
spring.
•
Verify that the coil spring is installed onto the
spring sheet correctly.
SSANGYONG Y200
2C-18 FRONT SUSPENSION
4. Remove the inner bearing race.
YAD2C360
YAD2C370
5. Remove the outer bearing race.
Notice: One of the upper bracket bolts should
coincide with the lower yoke insert projection as
shown.
YAD2C340
HUB AND BEARING
Disassembly/Assembly (Part time)
1. Remove the front hub and bearing assembly.
2. Remove the outer bearing (1) and inner seal.
Notice: Always use a new part as replacing inner
seal.
3. Remove the inner bearing (2).
YAD2C350
FRONT SUSPENSION 2C-19
SSANGYONG Y200
YAD2C380
Notice:
•
Install the outer bearing race using the front
outer bearing race installer and handle.
YAD2C390
•
Install the inner bearing race using the front
inner bearing race installer and handle
6. Installation should follow the removal procedure
in the reverse order
SSANGYONG Y200
2C-20 FRONT SUSPENSION
SPECIAL TOOLS AND EQUIPMENT
SPECIAL TOOLS TABLE
DW340 - 070
Front hub flange
remover
661 589 01 07 00
Front hub adjust nut
remover/installer
DW340 - 050
Sliding Hammer
DW 340 - 060
Front hub cap remover/
installer
DW 340 - 021 - 02
Front inner bearing race
installer
DW 340 - 021 - 03
Front outer bearing race
installer
661 589 13 33 00
Ball joint remover
DW 340 - 021 - 01
Handle
YAD2C400
YAD2C440
YAD2C410
YAD2C450
YAD2C420
YAD2C460
YAD2C430
YAD2C470
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст