SsangYong Rexton. Service manual — part 653
SSANGYONG Y200
9B-6 BODY INTERIOR
YAD9B050
YAD9B060
YAD9B070
INSTRUMENT
Removal / Installation
1. Remove negative terminal(-) from battery.
2. Remove seat of passenger to remove easily panel
of instrument.
REMOVAL AND INSTALLATION
4. Remove lower panel of driver seat in the instrument
panel.
3. Remove cover(1) of fuse box, switch panel(2) of
side mirror, release lever(3) of fuel tank cover.
BODY INTERIOR 9B-7
SSANGYONG Y200
YAD9B080
YAD9B090
YAD9B100
YAD9B110
5. Remove side cowl in the left side/ right side.
1) Remove front trim of door scuff in the left side /
right side.
2) Removing screw of side of foot-board, side of
door in the side cowl and then come to removal
of side cowl.
7. Removing center facia panel , remove Audio(1),
Aircon controller Assembly(2).
6. Separating connector and vacuum hose from
steering column assembly, remove steering
column shaft assembly.
3) After driver put clearance between pillar and
panel, remove side cowl.
SSANGYONG Y200
9B-8 BODY INTERIOR
YAD9B120
YAD9B130
YAD9B140
YAD9B150
8. Remove the console box.
10. After releasing fixing bolt and nut in the instrument
panel, remove panel assembly.
9. Remove connector of main harness linking to
center and right side /left in the instrument panel.
1) Connector linking to left side
2) Connector linking to right side
3) Connector linking to center
BODY INTERIOR 9B-9
SSANGYONG Y200
YAD9B160
YAD9B170
YAD9B180
YAD9B190
11. Installing the reverse of removal, insert each
connectors tightly.
COSOLE BOX
Removal / Installation
1. Separate front console cover and console tray.
3. Separate fixing bolts from console tray internal in
the console box of rear side.
2. After removing front console cover , separate fixing
bolts( 2).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст