SsangYong Rexton. Service manual — part 351
M161 ENGINE MECHANICAL 1B2-87
SSANGYONG Y200
YAD1B7Q0
Oil Circulation
1 Oil Strainer
2 Oil Pump
3 Oil Pan
4 Oil Non-Return Valve
5 Oil Filter
6 Oil Filter Bypass Valve
7 Main Oil Gallery
8 Closing Ball (
φ
15 mm)
9 Crankshaft
10 Connecting Rod Bearing
11 Crankshaft Bearing
12 Connecting Rod
13 Piston
14 Oil Spray (Piston Crown Area)
15 Non-Return Valve (Crankcase)
16 Oil Supply (To Chain Tensioner)
17 Camshaft
18 Cam Bearing
19 Valve
20 Oil Gallery (Supply Oil to Intake Tappet)
21 Oil Gallery (Supply Oil to Exhaust Tappet)
22 Ball (
φ
8 mm)
23 Camshaft Plug
24 Seal
25 Screw Plug
26 Oil Return Gallery
(Cylinder Head and Crankcase)
27 Oil Return Gallery (Crankcase)
28 End Cover (
φ
20 mm)
29 Oil Return Pipe
SSANGYONG Y200
1B2-88 M161 ENGINE MECHANICAL
YAD1B7R0
ENGINE OIL AND OIL FILTER ELEMENT
1 Oil Filter Cover 25 N•m (18 lb-ft)
2 O-Ring Replace
3 Oil Filter Element
4 Oil Drain Plug
5 Oil Filter Bypass Valve
M161 ENGINE MECHANICAL 1B2-89
SSANGYONG Y200
YAD1B7S0
YAD1B7T0
Tools Required
103 589 02 09 00 Oil Filter Remover
Replacement Procedure
1. Install the oil filter remover 103 589 02 09 00 on
the oil filter cover.
Notice: Make the screw cover removable by
tightening the bolt at the side of the oil filter
remover 103 589 02 09 00.
2. Install the wrench to the upper bolt in the oil filter
remover 103 589 02 09 00 and remove the oil cover
by turning it.
3. Remove the oil filter element.
Notice: Work with a cloth under the vehicle when
removing the oil filter element to not drain the oil.
4. Remove the drain plug and drain the engine oil.
Notice: Leave the oil filler cap open to ease the
engine oil discharge.
5. Tighten the engine oil drain plug after cleaning it.
Installation Notice
Replace the seal washer with new one.
6. Replace the O-ring in the oil filter cover with new
one.
Notice: Apply the engine oil to the O-ring.
7. Insert new oil filter element into the oil filter
housing.
8. Temporarily tighten the oil filter cover. Install the
Oil filter remover 103 589 02 09 00, and then
completely tighten it.
Installation Notice
Tightening Torque
25 N•m (18 lb-ft)
Tightening Torque
25 N•m (18 lb-ft)
SSANGYONG Y200
1B2-90 M161 ENGINE MECHANICAL
9. Fill up engine oil through the engine oil filler
opening (3).
10. Check for oil leaks at normal engine temperature
after starting the engine.
11. Stop the engine and wait 5 minutes.
Check the oil level and fill up as specified if neces-
sary.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст