SsangYong Rexton. Service manual — part 680
SSANGYONG Y200
9D-34 BODY ELECTRICAL
YAD9D590
YAD9D600
YAD9D610
YAD9D620
Removal and Installation
Head Lamp
1. Remove negative terminal of battery.
2. Remove the grill of radiator.
3. Remove mounting bolt (3ea) of head lamp.
6. Install the reverse order of removal.
5. Separate cover of bulb, connector, and bulb
orderly, from head lamp separated.
4. After separating connector of head lamp, remove
the head lamp.
BODY ELECTRICAL 9D-35
SSANGYONG Y200
YAD9D630
YAD9D640
YAD9D650
YAD9D660
•
After installing head lamp, proceed to arrange
of focus.
3. After separating bulb from rear combi-lamp and
then remove rear combi - lamp.
Rear combi - lamp
1. Remove the negative terminal from battery.
2. Separate fixing screw (2ea) of rear combi - lamp.
Turn signal lamp / fog lamp
1. Remove the negative terminal of battery and head
lamp.
2. After releasing fixing bolt of lamp of front turn
signal lamp and fog lamp, remove connector.
3. Remove lamp assembly from the bumper.
4. Install the reverse order of removal.
•
Fix the left of lamp on the hook of bumper, and
then tighten the right with fixing nut (2 ea).
SSANGYONG Y200
9D-36 BODY ELECTRICAL
YAD9D670
YAD9D680
YAD9D690
YAD9D700
Side lamp
1. After pushing side lamp to front side, pulling rear
of lamp, and then remove side lamp.
2. After removing the connector, remove side lamp.
Lamp of glove box
1. Open up cover of glove box.
2. After pushing lamp as indicated mark, remove
lamp of glove box.
3. After separating connector of lamp, remove lamp.
4. Install the reverse order of removal.
2. After separating fixing screw (2 ea) of lamp spoiler
of tail gate, and then remove connector.
3. Remove lamp assembly.
4. Install the reverse order of removal.
High mounted lamp
1. Remove spoiler from the tail gate.
BODY ELECTRICAL 9D-37
SSANGYONG Y200
YAD9D710
YAD9D720
YAD9D730
YAD9D740
Door lamp
1. Remove the negative terminal of battery.
2. After removing door trim, and then separate
connector of lamp.
Room lamp
Front lamp
1. After removing lense of lamp, remove bulb.
Lamp of license plate
1. Remove lamp of license plate.
2. Separate bulb from lamp.
3. After insert bulb into lamp, and then insert in the
hole of mounting of tail gate.
3. After releasing fixing screw of lamp, remove lamp.
4. Install the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст