SsangYong Rexton. Service manual — part 44
DI03-10
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
INTAKE SYSTEM
DI ENG SM - 2004.4
Y220_03013
<Circuit diagram of HFM sensor>
Power supply
Intake air
f l o w
sensor
Intake air temperature
sensor
HFM sensor
Signal
Ground
Ground
DI03-11
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
INTAKE SYSTEM
DI ENG SM - 2004.4
Y220_03014
HFM sensor
HFM Sensor - Removal and Installation
Y220_03016
Y220_03015
Preceding Work: Disconnection of negative battery cable
1. Disconnect the negative battery cable.
2. Loosen the clamps on the air cleaner and the turbo
charger and remove the duct.
3. Unscrew the bolts and remove the HFM sensor assembly.
Tightening torque
10 ± 1.0 Nm
DI03-12
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
INTAKE SYSTEM
DI ENG SM - 2004.4
Y220_03017
Y220_03018
Y220_03019
Y220_03020
4. Install in the reverse order of removal.
Intake Air Outlet Hose (Turbo Charger)
- Removal and Installation
1. Remove the radiator grille.
2. Loosen the clamp at both sides and remove the outlet
hose.
3. Loosen the clamp on the intake air hose and remove the
intake air hose.
Installation Notice
Notice
Securely fasten the clamps on the pipes and hoses.
Tightening torque
6 ~ 7 Nm
4. Install in the reverse order of removal.
DI03-13
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
INTAKE SYSTEM
DI ENG SM - 2004.4
Y220_03021
Y220_03022
Y220_03023
Y220_03024
1. Loosen the clamp at intercooler side.
2. Loosen the clamp at turbo charger side.
3. Separate the hose from the oil separator and remove the
intake duct.
4. Install in the reverse order of removal.
Intake Air Inlet Duct (Air Cleaner)
- Removal and Installation
Intake Air Inlet Duct (Intake Manifold)
- Removal and Installation
1. Loosen the clamp on the inlet hose in intercooler.
2. Loosen the clamp at the intake manifold and remove the
inlet hose.
Installation Notice
Tightening torque
6 ~ 7 Nm
3. Install in the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст