SsangYong Rexton. Service manual — part 687
SSANGYONG Y200
9D-62 BODY ELECTRICAL
YAD9D0U0
YAD9D0V0
YAD9D0W0
Removal and Installation
1. After inserting switch of window in the door handle,
separate grip of fixing hook.
3. Remove trim of door and seal.
4. After window glass is removed, remove regulator
assembly.
5. Remove motor of window from the regulator which
is separated.
6. Install the reverse order of removal.
2. After connector of window switch is separated,
remove window switch assembly.
BODY ELECTRICAL 9D-63
SSANGYONG Y200
YAD9D0Z0
YAD9D0Y0
Check and Repair
Main switch of power window
2. Lockong system of window.
YAD9D0X0
1. After main switch of power window is removed in
the driver seat, check that applying an electric
current of each terminal.
SSANGYONG Y200
9D-64 BODY ELECTRICAL
YAD9D1C0
Serve switch of passenger set and rear seat
1. After switch is removed, check that applying an
electric current of each terminal.
Rear seat
YAD9D1A0
YAD9D1B0
Passenger seat
BODY ELECTRICAL 9D-65
SSANGYONG Y200
YAD9D1D0
Check motor of power window
After terminal of motor is connected, check that motor
is operating softly, and then change pole of current,
motor is operating to the reverse direction softly, if
motor is operating unnormal, and then replace motor.
YAD9D1E0
YAD9D1F0
YAD9D1G0
Check rear window and defogger of quarter glass
Notice: It is prevention for the defogger not to have a
impact, so after taping foil of tin at the end of tester,
foil of tin is moving along with line of grid for checking
the circuit open or not.
2) If defogger is damaged by a fire between
center and positive terminal, value of voltage
is indicated 12 V.
1. At the state of idling, after switch of defogger is
turned on, check the below description.
1) After turn switch of defogger on, measure
voltage of defogger with voltmeter in the center
of glass, if value of voltage is 6V, heater line of
rear window is normal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст