Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 352
5.
CAUTION: Make sure that the radiator is not damaged when
installing the retaining straps.
Fit suitable retaining straps to the radiator.
6. Raise and support the vehicle.
For additional information, refer to:
Jacking
(100-02 Jacking and Lifting,
Description and Operation).
7. Remove the radiator splash shield.
For additional information, refer to:
Radiator Splash Shield
(501-02 Front
End Body Panels, Removal and Installation).
8. Detach the charge air cooler hose.
9. Remove the radiator support bar.
10. Disconnect the electrical connector.
11. Remove the charge air cooler hoses and manifold absolute pressure
and temperature (MAPT) sensor assembly.
12. Remove the MAPT sensor.
Installation
1. To install, reverse the removal procedure.
Tighten to 4 Nm.
2. Tighten to 25 Nm.
3. Tighten to 4 Nm.
4. Tighten to 4 Nm.
Published: 11-May-2011
Electronic Engine Controls - 2.0L Duratorq-TDCi/2.2L Duratorq-TDCi (110kW/150PS) -
Puma - Manifold Absolute Pressure (MAP) Sensor
Removal and Installation
Removal
1. Remove the oil level indicator.
2. Remove the oil filler cap.
3. NOTE: Install the oil filler cap and oil level indicator to prevent foreign
material entering the valve cover.
Remove the engine cover.
4. Disconnect the manifold absolute pressure (MAP) Sensor electrical
connector.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст