Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 645
Published: 11-May-2011
Instrument Panel and Console - Instrument Panel
Removal and Installation
Removal
All vehicles
1. Remove the console.
For additional information, refer to:
Floor Console
(501-12 Instrument
Panel and Console, Removal and Installation).
2. Remove the climate control panel.
For additional information, refer to:
Climate Control Assembly
(412-04
Control Components, Removal and Installation).
3. Remove the navigation system display module (if equipped).
For additional information, refer to:
Navigation System Display Module
(419-07 Navigation System, Removal and Installation).
4. Remove the instrument cluster.
For additional information, refer to:
Instrument Cluster
(413-01
Instrument Cluster, Removal and Installation).
5. Remove the passenger air bag module.
For additional information, refer to:
Passenger Air Bag Module
(501-20B
Supplemental Restraint System, Removal and Installation).
6. Remove the steering column.
For additional information, refer to:
Steering Column
(211-04 Steering
Column, Removal and Installation).
7. Remove the headlamp switch.
For additional information, refer to:
Headlamp Switch
(417-01 Exterior
Lighting, Removal and Installation).
Vehicles with manual transmission
8. Remove the gear selector knob.
9. Detach the gear selector surround.
10. Remove the gear selector surround.
1. Detach the reverse gear interlock mechanism.
2. Remove the gear selector surround.
All vehicles
11. Remove the right hand end panel.
1. Detach the front door opening weather strip.
2. Remove the right hand end panel.
12. Remove support panel.
13. Remove the lower vent.
1. Detach the bulb holder.
2. Remove the lower vent.
14. Remove the instrument panel retaining screws.
15. Detach the electrical harness.
16. Remove the instrument panel retaining screw.
17. Remove the instrument panel retaining screws.
18. Remove the left hand end panel.
1. Detach the front door opening weather strip.
2. Remove the left hand end panel.
19. Remove the lower vent.
1. Detach the bulb holder.
2. Remove the lower vent.
20. Remove the instrument panel retaining screws.
21. Detach the electrical harness.
22. Remove the instrument panel retaining screw.
23. Remove the instrument panel retaining screws.
24. Remove and discard the pop rivets.
25. Remove the instrument panel.
Installation
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст