Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 129
Published: 11-May-2011
Engine System - General Information - Piston Ring End Gap
General Procedures
1.
CAUTION: Do not mix up the piston rings. Install the piston rings
in the same position and location.
Using the Feeler Gauge, measure the piston ring gap.
The values given in the specification refer to a gauge ring used
during production.
Published: 11-May-2011
Engine System - General Information - Piston Ring-to-Groove Clearance
General Procedures
1. NOTE: The piston ring must protrude from the piston groove. To
determine the piston ring clearance, insert the Feeler Gauge right to the
back of the groove, behind the wear ridge.
Using the Feeler Gauge, measure the piston ring clearance.
Published: 11-May-2011
Engine System - General Information - Valve Seat Inspection
General Procedures
General Equipment
Valve seat width scale
1. Measure the width of the valve seat.
Measure the valve seat width using the
Valve seat width scale
.
If the value is not to specification rework the valve seat.
Published: 11-May-2011
Engine System - General Information - Valve Spring Free Length
General Procedures
1. Using a vernier gauge, measure the free length of each valve spring.
Verify the length is within specification.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст