Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 509
Published: 11-May-2011
Control Components - Air Discharge Temperature Sensor
Removal and Installation
Removal
1. Remove the lower vent.
1. Detach the bulb holder.
2. Remove the lower vent.
2. Disconnect the air discharge temperature sensor electrical connector.
3. Remove the air discharge temperature sensor.
Installation
1. To install, reverse the removal procedure.
Published: 11-May-2011
Control Components - Ambient Air Temperature Sensor
Removal and Installation
Removal
CAUTION: Make sure the ignition switch is in the off position before disconnecting the ambient air temperature sensor.
1. Detach the ambient air temperature sensor from the power assisted
steering cooler bracket.
2. Remove the ambient air temperature sensor.
Disconnect the electrical connector.
Installation
1. To install, reverse the removal procedure.
Published: 11-May-2011
Control Components - Climate Control Assembly
Removal and Installation
Removal
Vehicles with automatic transaxle
1. NOTE: To aid removal of the climate control assembly place the J-gate
selector in the neutral position.
Remove the J-gate surround.
Vehicles with manual transaxle
2. Detach the gear selector surround.
All vehicles
3. Disconnect the battery ground cable. For additional information, refer to
Section
414-01 Battery, Mounting and Cables
.
4. Remove the ashtray retaining screws.
5. Remove the ashtray.
Disconnect the electrical connectors.
6. Remove the climate control assembly mounting bracket upper retaining
screws cover.
7. Remove the climate control assembly mounting bracket upper retaining
screws.
8. Remove the climate control assembly mounting bracket lower retaining
screws.
9. Disconnect the hazard lamp switch assembly electrical connectors.
10. Remove the hazard lamp switch assembly.
Remove the retaining screws.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст