Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 624
Published: 11-May-2011
Seating - Rear Seat BolsterWagon
Removal and Installation
Removal
1. Remove the loadspace cover.
2. Fold down the rear seat backrest.
3. Detach the loadspace cover retaining bracket finisher trim.
4. Detach the rear seat bolster.
1. Press the seat bolster upper retaining latch.
2. Detach the rear seat bolster.
5. Remove the rear seat bolster.
Installation
1. To install, reverse the removal procedure.
Published: 11-May-2011
Seating - Rear Seat Cushion
Removal and Installation
Removal
1. NOTE: Remove and discard old retaining clips.
Remove the rear seat cushion.
1. Detach the rear seat cushion front retaining clips.
2. Slide the rear seat cushion out of the retaining hooks.
3. Remove the rear seat cushion.
Installation
1. NOTE: Make sure the safety belt buckles are located through the
cushion.
• NOTE: Install new seat cushion front retaining clips
To install, reverse the removal procedure.
Published: 11-May-2011
Seating - Seat Base
Removal and Installation
Removal
1. Remove the front seat backrest.
For additional information, refer to:
Front Seat Backrest
(501-10
Seating, Removal and Installation).
2. Detach the electrical connectors.
3. Remove the safety belt buckle and pretensioner.
4. Detach the seat motor electrical connectors.
5. Remove the seat base.
Installation
1. To install, reverse the removal procedure.
Tighten to 15 Nm.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст