Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 466
5. Remove the fuel level sender.
Installation
• W ARNINGS:
Do not smoke or carry lighted tobacco or an open flame of any type when working on or near any fuel related components. Highly
flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.
Do not carry or operate cellular phones when working on or near any fuel related components. Highly flammable vapors are always
present and may ignite. Failure to follow these instructions may result in personal injury.
This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions. Failure
to follow these instructions may result in personal injury.
CAUTION: Make sure the float or arm are not damaged while installing the fuel pump module.
1. To install, reverse the removal procedure.
Published: 11-May-2011
Fuel Tank and Lines - Fuel Level Sender2.0L Duratorq-TDCi/2.2L Duratorq-TDCi
(110kW/150PS) - Puma
Removal and Installation
Removal
• W ARNINGS:
Do not smoke or carry lighted tobacco or an open flame of any type when working on or near any fuel related components. Highly
flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.
Do not carry or operate cellular phones when working on or near any fuel related components. Highly flammable vapors are always
present and may ignite. Failure to follow these instructions may result in personal injury.
This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions. Failure
to follow these instructions may result in personal injury.
1. Remove the fuel level sensor.
For additional information, refer to:
Fuel Level Sensor - 2.0L Duratorq-
TDCi/2.2L Duratorq-TDCi (110kW /150PS) - Puma
(310-01 Fuel Tank and
Lines, Removal and Installation).
2. NOTE: Note the position of the tie straps securing the harness to the
fuel pipes.
Remove the tie straps.
3. NOTE: Vehicle with single electrical connector shown, vehicles with
multiple electrical connectors similar.
Disconnect the electrical connector from the fuel level sensor flange.
4. Remove the fuel level sender.
Installation
• W ARNINGS:
Do not smoke or carry lighted tobacco or an open flame of any type when working on or near any fuel related components. Highly
flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.
Do not carry or operate cellular phones when working on or near any fuel related components. Highly flammable vapors are always
present and may ignite. Failure to follow these instructions may result in personal injury.
This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions. Failure
to follow these instructions may result in personal injury.
1. To install, reverse the removal procedure.
Published: 11-May-2011
Fuel Tank and Lines - Fuel Level Sender LH2.5L NA V6 - AJV6/3.0L NA V6 - AJ27
Removal and Installation
Removal
• W ARNINGS:
Do not smoke or carry lighted tobacco or an open flame of any type when working on or near any fuel related components. Highly
flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.
Do not carry or operate cellular phones when working on or near any fuel related components. Highly flammable vapors are always
present and may ignite. Failure to follow these instructions may result in personal injury.
This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions. Failure
to follow these instructions may result in personal injury.
1. NOTE: All vehicles.
Remove the transfer pump.
For additional information, refer to:
Fuel Transfer Pump
(310-01 Fuel
Tank and Lines, Removal and Installation).
2. NOTE: Non federal market vehicles only.
Disconnect the fuel level sender electrical connector.
3. NOTE: Non federal market vehicles only.
Remove the fuel level sender.
4. NOTE: Federal market vehicles only.
• NOTE: Note the position of the tie straps securing the harness to the
fuel pipes.
Remove the tie straps.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст