Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 205
Published: 11-May-2011
Engine - 2.0L Duratorq-TDCi/2.2L Duratorq-TDCi (110kW/150PS) - Puma -
Engine2.0L Duratorq-TDCi
Removal
Special Tool(s)
Remover/Installer, Cooling Hose Clamp
303-397 (24-003)
Ball joint splitter
204-192
Wheel hub puller
205-491
Adaptor nuts
205-491-01
Forcing screw
204-269
Slide hammer
100-012
Slide hammer shaft
100-012-02
Halfshaft remover fork
204-226
Powertrain assembly jack
HTJ1200-02
Engine lifting eye
303-1067
5 Point Security Torx Bit
418-535
Removal
1. Detach the lower steering column shaft.
2. Remove the battery tray.
For additional information, refer to:
Battery Tray
(414-01 Battery,
Mounting and Cables, Removal and Installation).
3. Recover the air conditioning refrigerant.
For additional information, refer to:
Air Conditioning (A/C) System
Recovery, Evacuation and Charging
(412-00 Climate Control System -
General Information, General Procedures).
4. Drain the cooling system.
For additional information, refer to:
Cooling System Draining, Filling and
Bleeding
(303-03B Engine Cooling - 2.0L Duratorq-TDCi/2.2L
Duratorq-TDCi (110kW /150PS) - Puma, General Procedures).
5. Remove the exhaust flexible pipe.
For additional information, refer to:
Exhaust Flexible Pipe - 2.0L
Duratorq-TDCi/2.2L Duratorq-TDCi (110kW/150PS) - Puma
(309-00
Exhaust System, Removal and Installation).
6. Disconnect the heater hoses from the heater core.
7. Disconnect the radiator lower coolant hose.
8.
CAUTION: To prevent the vehicle becoming unstable when the
engine and transmission assembly are removed, install the vehicle
tie-down straps. Failure to follow this instruction may result in damage to
the vehicle.
• NOTE: Right-hand shown, left-hand similar.
Install the front vehicle tie down straps.
9.
CAUTION: To prevent the vehicle becoming unstable when the
engine and transmission assembly are removed, install the vehicle
tie-down straps. Failure to follow this instruction may result in damage to
the vehicle.
• NOTE: Right-hand shown, left-hand similar.
Install the rear vehicle tie down straps.
10. Lower the vehicle to a suitable working height.
11. Remove the front wheels and tires.
For additional information, refer to:
Wheel and Tire
(204-04 Wheels and
Tires, Removal and Installation).
12. Remove the front brake pads.
For additional information, refer to:
Brake Pads
(206-03 Front Disc
Brake, Removal and Installation).
13. NOTE: Left-hand shown, right-hand similar.
Remove and discard the brake caliper anchor plate retaining bolts.
14. NOTE: Left-hand shown, right-hand similar.
Detach the brake caliper and brake caliper anchor plate assembly.
15. NOTE: Left-hand shown, right-hand similar.
Detach the brake pipe.
16.
CAUTION: Support the brake caliper assembly using tie straps.
Failure to follow this instruction may result in damage to the vehicle.
• NOTE: Left-hand shown, right-hand similar.
Reposition and attach the brake caliper assembly.
17. NOTE: Left-hand shown, right-hand similar.
Detach the anti-lock braking system (ABS) wheel speed sensor.
18. NOTE: Left-hand shown, right-hand similar.
Disconnect the ABS wheel speed sensor.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст