Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 213
52. Detach the engine wiring harness electrical connector.
53. NOTE: Bolt remains captive in the engine control module (ECM)
electrical connector.
Using the special tool, disconnect the ECM harness electrical connector.
54. Detach the engine wiring harness retaining clip.
55. Detach the engine wiring harness earth lead.
56. Detach the selector cables.
57. NOTE: Secure the selector cables using tie straps.
Detach the selector cables.
58. NOTE: Right-hand shown, left-hand similar.
Detach the strut and spring assembly.
59. Raise the vehicle.
60.
CAUTION: Do not support the engine and transaxle assembly
directly on the oil pan.
Install the special tool.
61. NOTE: Left-hand shown, right-hand similar.
Position and adjust the special tool rear height adjuster.
62. NOTE: Right-hand shown, left-hand similar.
Position and adjust the special tool front height adjuster.
63. Position and adjust the special tool engine height adjusters.
64. Remove the engine rear mount retaining nut.
65. NOTE: Discard the retaining nuts.
Remove the engine front mount retaining nuts.
66. NOTE: Left-hand shown, right-hand similar.
Remove the front subframe reinforcement plate retaining bolts.
67. NOTE: Left-hand shown, right-hand similar.
Remove the front subframe reinforcement plate.
68. NOTE: Left-hand shown, right-hand similar.
Detach the front subframe.
69. Lower the engine, suspension and transmission assembly to gain
access to the A/C pipe.
Rotate the special tool height adjustment valve counter clockwise.
70. NOTE: Secure the A/C pipe using tie straps.
Reposition the AC pipe clear of the engine, suspension and transmission
assembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст