Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 599
5. Detach the safety belt lower anchor from the underside of the seat.
6. Remove the B-pillar upper trim panel.
Installation
1. To install, reverse the removal procedure.
Tighten to 55 Nm.
Published: 11-May-2011
Interior Trim and Ornamentation - Cowl Side Trim Panel
Removal and Installation
Removal
1. Detach the front door opening weather-strip.
2. Remove the front scuff plate trim panel. For additional information,
refer to
Scuff Plate Trim Panel—Front
.
3. Remove the cowl side trim panel.
Installation
1. To install, reverse the removal procedure.
Published: 11-May-2011
Interior Trim and Ornamentation - C-Pillar Trim Panel4-Door
Removal and Installation
Removal
1. Remove the rear seat side bolster. For additional information, refer to
Section
501-10 Seating
.
2. NOTE: The C-pillar trim panel is secured to the top of the C-pillar by a
retaining strap. The retaining strap must be detached from the C-pillar
before the C-pillar trim panel is removed.
Detach the C-pillar trim panel.
3. Remove the C-pillar trim panel.
Installation
1. To install, reverse the removal procedure.
Published: 11-May-2011
Interior Trim and Ornamentation - C-Pillar Trim PanelWagon
Removal and Installation
Removal
1. Remove the loadspace cover.
2. Fold down the rear seat backrest.
3. Detach the loadspace cover retaining bracket finisher trim.
4. Reposition the rear seat bolster.
1. Press the tang.
2. Reposition the rear seat bolster.
5. Remove the seat bolster upper retaining latch.
6. Remove the C-pillar trim panel lower retaining screw.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст